Earbuds Round-Up
- Thread starter ClieOS
- Start date
-
- Tags
- akg akg-k-319-in-ear-bud-headphone-dark-charcoal audio-technica-ath-cm707 baldoor-earbell-e100 bang-olufsen-a8-earphones blox-anv3 blox-m2c blox-tm7 blue-ever-blue-328r creative-aurvana-air-headphones-over-the-ear crossroads-hr1 dunu-alpha-1-hybrid-earbuds-dynamic-balanced-armature-high-fidelity-headphones earbuds hifiman-electronics-es100-vintage-style-earbud-with-15mm-driver-blue rose sennheiser sennheiser-mx-580-stereo-headphones-with-intergrated-volume-control sennheiser-mx-581-stereo-stereo-headphones-with-intergrated-volume-control sennheiser-mx-760 sennheiser-mx-90-style-series-in-ear-headphone-with-volume-control sunrise-audio sunrise-audio-charm venture-electronics-ve-zen yuin-pk1-earphones yuin-pk3-earphones
Very sorry to hear this... sucks monkey balls for sure!
LaughMoreDaily
Headphoneus Supremus
...or even better: stretching your ears and keep the iem cable danging like a ear-necklace (permanently) until you want to connect them to a pair of earphones.
Last edited:
vygas
100+ Head-Fier
That Rose bud is gorgeous, can't wait to buy a pair once they go on AliexpressYincrow's latest flagship, RW-3000 (16Ω, 113dB/mW)
https://world.taobao.com/item/659065040960.htm
---
Rose Technics upcoming flagship, Martini (32Ω, 102dB/mW)
https://world.taobao.com/item/658705632336.htm - pre-order
mochill
Headphoneus Supremus
Looks like the new pd21 is totl sound especially 4 strand cable one
X6 vs Vido
Besides accessories and slightly nicer cable on Yincrow (appreciable difference) they look the same.
Besides accessories and slightly nicer cable on Yincrow (appreciable difference) they look the same.
Last edited:
irv003
Member of the Trade: Newbsound/BBB/Bisoy Buds
and they are using the same driverX6 vs Vido
Besides accessories and slightly nicer cable on Yincrow (appreciable difference) they look the same.
I tried X6 with donuts and was not fitting awesome. Sounded a little off. Next tried Vido with silicone gaskets + donuts. Awww yeah!
* graph by @tgx78
n00b
500+ Head-Fier
just received newbsound 32 pro and can confirm what @mochill and @emusic13 have said so far regarding its signature. fortunately, i enjoy this type of sound. i can also see why @Shenzai didnt enjoy them as much, but for the same reasons. it will come down to a matter of preference for sure. im going to take some time to rest my ears and do more formal comparisons to the most popular and recommended buds in here, the yincrow x6 and k’s lbbs.
mochill
Headphoneus Supremus
Glad you trusted my impression
i love vido. i don't have the red variant. they are cheaper than the x6 and they sound very similar.X6 vs Vido
Besides accessories and slightly nicer cable on Yincrow (appreciable difference) they look the same.
calcatreppola
Also known as ördögszekér
can you tell us more? quite cruel of you to say only this
jkjk123
100+ Head-Fier
I ended up getting a pair of the Newbsound 32 Pro after initially thinking that earbuds were not for me due to the lack of isolation.
I'm definitely enjoying them so far. I personally prefer a slightly warm signature and these are pretty close to my preference. These have a good balance across the frequency - I find them to be slightly warm, with good clear vocals, and extended treble without sibiliance.
The bass on these are quite good, with good texture (at least for earbuds) - from memory they sound on par with the bass on the 266 Blur MX150 which I tried also.
Doing a frequency sweep across, I hear a peak from 2 - 5 kHz (interestingly I also noticed this on the Blurs, except the peak there was even greater), and a dip from 5.5 kHz to 7 kHz. Bass extension is good as well, I can hear down below 20 hZ if I turn up the volume, though it obviously drops off sharply when it gets that low.
I have no opposition to using EQ since all of my listening with wired IEMs/earbuds is in front of the computer. So for my preference, I reduced both midbass and the 2-5 kHZ region and increase the sub bass, all by a few dBs.
The cable has a slight spring to it and is less supple than I prefer, but overall good build and pretty flexible, no issues with it so far (266 Blur were also not supple/flexible though very good build/thickness)
I'm definitely enjoying them so far. I personally prefer a slightly warm signature and these are pretty close to my preference. These have a good balance across the frequency - I find them to be slightly warm, with good clear vocals, and extended treble without sibiliance.
The bass on these are quite good, with good texture (at least for earbuds) - from memory they sound on par with the bass on the 266 Blur MX150 which I tried also.
Doing a frequency sweep across, I hear a peak from 2 - 5 kHz (interestingly I also noticed this on the Blurs, except the peak there was even greater), and a dip from 5.5 kHz to 7 kHz. Bass extension is good as well, I can hear down below 20 hZ if I turn up the volume, though it obviously drops off sharply when it gets that low.
I have no opposition to using EQ since all of my listening with wired IEMs/earbuds is in front of the computer. So for my preference, I reduced both midbass and the 2-5 kHZ region and increase the sub bass, all by a few dBs.
The cable has a slight spring to it and is less supple than I prefer, but overall good build and pretty flexible, no issues with it so far (266 Blur were also not supple/flexible though very good build/thickness)
Scubadevils
Headphoneus Supremus
- Joined
- Nov 18, 2011
- Posts
- 7,934
- Likes
- 47,521
LBBS land today... 32pro tomorrow!
Anyone tried these?
https://a.aliexpress.com/_mq62Q6i
Also, do any Smabat come with 4.4mm?
Anyone tried these?
https://a.aliexpress.com/_mq62Q6i
Also, do any Smabat come with 4.4mm?
Smabat ST10s gold is 3.5 mmcx, but I use with 2.5 balanced mmcx cable for more power delivery from my dongles. $10-$15 investment. The BGVP I have not seen any real positive reviews and it is rarely mentioned here, therefore draw your own conclusions.
The ST10s gold is very good IMO. Awesome (bud) bass. Powerfully sounding. Great with all electronic music.
Users who are viewing this thread
