eaglesgift
500+ Head-Fier
Have some decorum man - put some clothes on when you're trying out new earbuds!Had them in my ears for 5 minutes naked
Have some decorum man - put some clothes on when you're trying out new earbuds!Had them in my ears for 5 minutes naked
Have some decorum man - put some clothes on when you're trying out new earbuds!
150's in the house! Had them in my ears for 5 minutes naked, but I can tell that they are indeed winners - thanks for the recommendation!
I'll be trying them with various foams. Which foams do you prefer with them? Also, any changes with burn in? Thanks!
someoen explain to me?
i ran those youtube tests on sub bass on the emx500. after a while the emx 500 became more clear or pronounced sound. Is this called Burn in?
not long, just few mins... a very low sub bass test in youtubeYes, either physical burn in or brain burn in or both
How long did you run those tests?
not long, just few mins... a very low sub bass test in youtube
switched foams yes.....If the gear responds to burn in, it typically takes 24, 48, 150 hours (depending on the gear) for there to be any effect, so it would be odd for a few minutes to effect them. Did you switch foams, or have a glass of wine, or anything?
switched foams yes.....
Hows the mmcx connectors on your svara and daik? Are they just as tight? I suspect to200 inherits the mmcx from ty2 pro and the mmcx connectors on to200 are super tight. I had to force it loose and i was really worried because some transparent plastics are wrapping the mmcx metal connectors. They look and feel fragile to me.
Anyhow i ordered a 3.5mm mmcx cable from nicehck (the new 15usd version of the his house brand) to prepare myself for the hy1000 fangzhang 方丈 that i ordered recently from taobao. I hope they fit together nicely. The stock cable of hy1000 has memory ends to conform to different ears, just like those shure iem cables.
The OurArt Ti7 that I ordered from Penon Audio, arrived yesterday.
I listened for a while with the stock cable, connected to my iFi Micro iDSD (XBass=On; 3D HolographicSound=On), streaming audio from my Roku 4, and they sounded good and clear, with a bit of a Midrange & Treble emphasis.
Then I swapped out the Donut Foams for Hiegi Full Foams, connected the Ti7 to my Impact Audio Cables 2.5mm TRRS > MMCX cable, and hooked them to the Balanced output of my Onkyo DP-X1B (EQ=Off; Viper4Android=ON for Spatial & Bass enhancement).
Since the Ti7 don't have a strong Bass impact, they would probably benefit from a warm source or amp, like my Walnut F1.
Still awaiting the MusicMaker ToneKing TO200 that I ordered from NiceHCK Audio.
https://aliexpress.com/item//32836595258.htmlWow! I think I need this!
Editing to add: does anyone have a good link for this? NiceHCK doesn't seem to have it.
Maybe the dimensions of Ti7's jacks are on the lower side. Your Ti7 sounds quite fragile to me and yes the split MMCX design makes a lot of sense.The MMCX plugs on the cable that came with the Ti7, seems to connect & disconnect with normal force on my other earbuds & earphones - so it must be the Ti7 MMCX jacks that are tight.
I've got some MMCX plugs with a "Split GND", rather than a "Floating GND Ring". They are snug on my other devices, but I'm afraid to try and plug them all the way in to the Ti7.
https://ae01.alicdn.com/kf/HTB1e6YL...ATL-Style-For-MMCX-UM60-UE900-SE535-SE215.jpg
I'm going to put a set of them on my VE Espresso cable.
I just ordered these from AK Audio on aliexpress last night
just got the RY4S with dark braided cable
initial impression is positive. i will do a comparison with EMX500
Th following sound charactistics are present and noticeable in both > what it means is that its present and not absent
> means Better , < lesser and = Same
Treble : RY4S < EMX 500
Sparkle : RY4S < EMX 500
Mid : RY4S > EMX500
Mid Bass : RY4S > Emx500
Sub Bass : RY4S < EMX500
Clarity : RY4S > EMX500
Transparency: RY4S > EMX500
Vocals : RY4S > EMX500
Articulation: RY4S < EMX500
Musicality: RY4S < EMX500
Soundstage
Accuracy / Positioning: RY4S > EMX500
Depth: RY4S < EMX500
Width : RY4S < EMX500
Height: RY4S > EMX500
Aural Accoustics: RY4S < EMX500
Ambience : RY4S = EMX500
Resolution: RY4S > EMX500
The main way EMX500 is better is sub bass, and aural / background acoustics which makes it better musicality and articulation
The main way RY4S is better in being clinical which makes it better in sound reproduction and clarity