bundy
New Head-Fier
- Joined
- Aug 13, 2013
- Posts
- 37
- Likes
- 13
this is my bedroom set up not as good as most i'v seen but it does the job very well for me.
- Joined
- Feb 1, 2011
- Posts
- 5,947
- Likes
- 2,461
Yeah, i've seen a few mods on the Marantz CD-52 on the internet, may have a look at some point. May even venture to re-cap the amp as they are quite old bits of kit, and new caps (nichicon probably) is always good.
40w per channel will be fine for the Mission 702e I shall be getting (rated 25-100w)
40w per channel will be fine for the Mission 702e I shall be getting (rated 25-100w)
LugBug1
Headphoneus Supremus
- Joined
- Jan 10, 2011
- Posts
- 5,229
- Likes
- 831
Yeah, i've seen a few mods on the Marantz CD-52 on the internet, may have a look at some point. May even venture to re-cap the amp as they are quite old bits of kit, and new caps (nichicon probably) is always good.
40w per channel will be fine for the Mission 702e I shall be getting (rated 25-100w)
You got a bargain there bud. Those 52 SE normally go for about £60-80.
Nevermind the mods... Use it as a transport and you will have instant high end (providing you have a capable dac)
- Joined
- Feb 1, 2011
- Posts
- 5,947
- Likes
- 2,461
Yeah, I bought it on a whim as it was cheap (£40 for CD-52 SE and SR-47) just need to replace CDM4 gear. The inside is still very clean and good condition. I only have a iFi iDAC which is USB only unfortunately.
But stock it sounds good as it is, CDs load very quickly and play fine. Will give it a good clean, any tips on cleaning the outer part?
But stock it sounds good as it is, CDs load very quickly and play fine. Will give it a good clean, any tips on cleaning the outer part?
- Joined
- Jun 14, 2013
- Posts
- 68
- Likes
- 11
Hey guys I just auditioned the burson soloist SL today and feel that it might be the right amp for me. I would need a DAC to pair with it. I have a budget of about 1000 USD , can anyone recommend me a DAC that will pair well with it ? I will be using it out of my laptop with a pair of Audeze LCD-2s.
LugBug1
Headphoneus Supremus
- Joined
- Jan 10, 2011
- Posts
- 5,229
- Likes
- 831
Yeah, I bought it on a whim as it was cheap (£40 for CD-52 SE and SR-47) just need to replace CDM4 gear. The inside is still very clean and good condition. I only have a iFi iDAC which is USB only unfortunately.
But stock it sounds good as it is, CDs load very quickly and play fine. Will give it a good clean, any tips on cleaning the outer part?
Depending on how dirty a component is, sometimes I'll only use a baby wipe. They are ideal and of course ph neutral.
However if its a big job, I use good old soap and water. Just washing up liquid in a small bowl of hot water (If it was some vintage aluminium I'd add some vinegar). Use a soft cloth dampened with the soapy water and gently rub and wipe dry at the same to stop the water building up and possibly getting inside. Cotton buds for corners etc.
Always make sure its completely dry before switching it on again for risk of shorts. A hair dryer can come in handy here.
Don't forget to post pics when your done. I love the look of those 52's. Classics!
Or you could add em here
http://www.head-fi.org/t/703928/do-you-own-a-vintage-cd-player-pics-please
pez
Headphoneus Supremus
- Joined
- Jul 30, 2007
- Posts
- 2,192
- Likes
- 23
grado+vali= ahhhhhhhhh !
You gave me an idea/excuse to potentially pick up some Grado's again...
- Joined
- Feb 1, 2011
- Posts
- 5,947
- Likes
- 2,461
Will post pics when they are all cleaned up
parbaked
Headphoneus Supremus
- Joined
- Apr 12, 2012
- Posts
- 2,119
- Likes
- 216
Will post pics when they are all cleaned up
analogsurviver gives a nice demo of cleaning vintage gear with WD40 and a toothbrush in the vintage thread.
http://www.head-fi.org/t/537704/calling-all-vintage-integrated-receiver-owners/11715
You gave me an idea/excuse to potentially pick up some Grado's again...
you do have to have a light touch due to the micrphonic tubes, but its not bad, and only last a short time,
but once the volume is set, sweet, sweet, dynamic music !
Sorrodje
Headphoneus Supremus
- Joined
- Sep 21, 2012
- Posts
- 2,615
- Likes
- 932
Already posted in HD800 thread .
/= coax ==> REGA DAC ==> MG HEAD ===\
/ \
. PC (UBUNTU) PCM 24/96 === Poppulse USB>SPIDF < > FIIO HS2 switcher ===>> HD800
\ /
\= toslink ====> NFB12.1 ===> VALI ===/
Little experience in order to compare my two rigs
Silent One
What silence said... then nothing.
- Joined
- Aug 9, 2010
- Posts
- 22,343
- Likes
- 665
Very nice snapple10!
silversurfer616
1000+ Head-Fier
Metrum Octave/Crack with Speed Ball/HD600 and Magnum V5
parbaked
Headphoneus Supremus
- Joined
- Apr 12, 2012
- Posts
- 2,119
- Likes
- 216