aceedburn
1000+ Head-Fier
Chameleon 2.0. I love this. Switched to 1Z of course.hey @aceedburn , which CFW are you rocking these days ?
Chameleon 2.0. I love this. Switched to 1Z of course.hey @aceedburn , which CFW are you rocking these days ?
As I recall Chameleon is one of the early fw that don’t require roll back though I never tried itThanks for the Chameleon 2 FW @aceedburn !
If I have FEv2 running atm, what is the best way to try Chameleon 2? Do I stock revert back to stock and then install Chameleon?
If I want to put back FEv2 (its my favourite fw) how do I stock revert from Chameleon (there is only one .exe file there, without a stock revert file)?
Thanks in advance! The sound of the Sony WM1 players is so smooth and addicting, there is still nothing like it if you like that kind of sound. The various custom fws make it all even better and we can have so many possibilities for free with just one DAP, thats awesome and highly underrated! Mrwalkman is a good man
Yes, you need to use the stock revert every time you want to use a new custom firmware. After installing Chameleon 2.0, you can switch the models directly from the player. I have added the stock revert file for chameleon 2.0 in the new link below. The new link contains the Chameleon 2.0 and the stock revert file. The earlier link has been disabled. Cheers.Thanks for the Chameleon 2 FW @aceedburn !
If I have FEv2 running atm, what is the best way to try Chameleon 2? Do I stock revert back to stock and then install Chameleon?
If I want to put back FEv2 (its my favourite fw) how do I stock revert from Chameleon (there is only one .exe file there, without a stock revert file)?
Thanks in advance! The sound of the Sony WM1 players is so smooth and addicting, there is still nothing like it if you like that kind of sound. The various custom fws make it all even better and we can have so many possibilities for free with just one DAP, thats awesome and highly underrated! Mrwalkman is a good man
Thanks a lot @aceedburn !Yes, you need to use the stock revert every time you want to use a new custom firmware. After installing Chameleon 2.0, you can switch the models directly from the player. I have added the stock revert file for chameleon 2.0 in the new link below. The new link contains the Chameleon 2.0 and the stock revert file. The earlier link has been disabled. Cheers.
https://drive.google.com/drive/folders/1Ib7ujL2ZFLr1PydxBN6_wytCaEzJHXo3?usp=sharing
YesThanks a lot @aceedburn !
So now I can install Chameleon 2.0, then if I am not a fan, I can stock revert back to full stock with the corresponding "BackToStock 3.02" file found on your page .....and then I could reinstall FEv2 again like always, right? Sorry for the noob questions
Thanks for the updateYes, you need to use the stock revert every time you want to use a new custom firmware. After installing Chameleon 2.0, you can switch the models directly from the player. I have added the stock revert file for chameleon 2.0 in the new link below. The new link contains the Chameleon 2.0 and the stock revert file. The earlier link has been disabled. Cheers.
https://drive.google.com/drive/folders/1Ib7ujL2ZFLr1PydxBN6_wytCaEzJHXo3?usp=sharing
Yeah. Enjoy!Thanks a lot @aceedburn !
So now I can install Chameleon 2.0, then if I am not a fan, I can stock revert back to full stock with the corresponding "BackToStock 3.02" file found on your page .....and then I could reinstall FEv2 again like always, right? Sorry for the noob questions
Hi sir sorry just want to clarify this to be sure too, i have installed chameleon 2.0 on my wm1a now… but did i read correctly when i backread, that i should switch it in the settings portion then reinstall chameleon 2.0 again? If yes, any way to find out if its on “1Z” sound already or still on the basic chameleon 2.0 firmware? Thanks and apologies in advance for the basic questions… i already backread but just want to be sure as there might be an updated instructions many thanksYeah. Enjoy!
Hey. Every time you switch the model from within the player in Chameleon, you are required to install the firmware again to fully enjoy the appropriate tuning for your selected device change. The device will show in the unit information each time you switch it. So it will show either WM1A or WM1Z so you always know which model you’re on. Hope it’s clear and feel free to ask as many questions as you want. Always willing to help.Hi sir sorry just want to clarify this to be sure too, i have installed chameleon 2.0 on my wm1a now… but did i read correctly when i backread, that i should switch it in the settings portion then reinstall chameleon 2.0 again? If yes, any way to find out if its on “1Z” sound already or still on the basic chameleon 2.0 firmware? Thanks and apologies in advance for the basic questions… i already backread but just want to be sure as there might be an updated instructions many thanks
Hi sir sorry just want to clarify this to be sure too, i have installed chameleon 2.0 on my wm1a now… but did i read correctly when i backread, that i should switch it in the settings portion then reinstall chameleon 2.0 again? If yes, any way to find out if its on “1Z” sound already or still on the basic chameleon 2.0 firmware? Thanks and apologies in advance for the basic questions… i already backread but just want to be sure as there might be an updated instructions many thanks
Correct (@aceedburn) You can also mix and match the custom firmware & tuning profiles with Chameleon which is one of it's lesser known points i.e.Hey. Every time you switch the model from within the player in Chameleon, you are required to install the firmware again to fully enjoy the appropriate tuning for your selected device change. The device will show in the unit information each time you switch it. So it will show either WM1A or WM1Z so you always know which model you’re on. Hope it’s clear and feel free to ask as many questions as you want. Always willing to help.