[wolfetan44]

Quote:

Inside the housing

Is it easy to damage it though?

 

[kvtaco17]

Only if you cut them... Its super fine like the width of a human hair. Just be careful... I've done tons of liberations and never goofed it up

 

[fleasbaby]

..fear not...if a clumsy oaf like me can do it multiple times over, and learn how to solder, I am sure you are fine.

 

[Kaupakay]

     Is there a full video of the entire recabling process. I'm not really all that worried about soldering the cable to the headphones I just dont know how to prep the cable and install it and what goes where. Like if I used Mogami Starquad. Do you just use the normal microphone cable stuff and strip the wires out or what do you do?

 

[AHorseNamedJeff]

Google it. Ive seen it on youtube before.

 

[liquidzoo]

Quote:

Is it easy to damage it though?

I've never recabled my Grados, but I know that those wires are easy to damage (if you're not careful) on my Beyers.  I know because I did it, but I was able to fix it.
 
As long as you're careful and don't apply too much heat you'll be just fine.

 

[7keys]

Quote:

Yea, I'm waiting for the knife to arrive that Turbulent Labs recommended.

 
What knife is that? Who did you buy it from?

 

[wolfetan44]

Quote:

Quote:

Yea, I'm waiting for the knife to arrive that Turbulent Labs recommended.

 
What knife is that? Who did you buy it from?

Triangular file knife, something like that.

 

[dba UK]

Did someone mention Carbon Fibre?
 
We'll put a thread up very soon explaining our goals for this project, available Q4 2013.
 
All enquiries welcome (no developments with Turbulent X drivers, be the first!)
 
F1 Grade Structural CF 
http://s276.photobucket.com/user/dbapimp/media/SNB12932-1.jpg.html
 
F1 Grade Aero CF
http://s276.photobucket.com/user/dbapimp/media/SNB12861-1.jpg.html
 
Close-up of Structural CF
http://s276.photobucket.com/user/dbapimp/media/SNB12938-1.jpg.html
 
Hope you like & happy listening
demand better audio
 
[link to photobucket updated]

 

[wolfetan44]

I can't see it, it says error on photobucket.

 

[fleasbaby]

That's insane...LMAO...how do they sound, and what drivers do you have in them? Was that felt or damping of some sort I saw behind the grills?

 

[wolfetan44]

Wow, that's amazing!!

 

[dba UK]

Quote:

That's insane...LMAO...how do they sound, and what drivers do you have in them? Was that felt or damping of some sort I saw behind the grills?

they sound 'better' than the originals, that was one of our design goals - without that box ticked there's no point right?
The HP-A is based on the Alessandro MS1i. The raw/donor drivers are liberated, tested, modified and retested prior to rehousing. To date we have not liberated any GS or RS drivers but have completed upgrade packages for all of the SR and PS range of drivers. 
Not felt but a dual density foam membrane, good for air transients bad for frequency transients.

 

[dba UK]

Quote:

Wow, that's amazing!!

thank you & apologies for the bad links, my bad 

 

[7keys]

Quote:

Did someone mention Carbon Fibre?
 
We'll put a thread up very soon explaining our goals for this project, available Q4 2013.
 
All enquiries welcome (no developments with Turbulent X drivers, be the first!)
 
F1 Grade Structural CF 
http://s276.photobucket.com/user/dbapimp/media/SNB12932-1.jpg.html
 
F1 Grade Aero CF
http://s276.photobucket.com/user/dbapimp/media/SNB12861-1.jpg.html
 
Close-up of Structural CF
http://s276.photobucket.com/user/dbapimp/media/SNB12938-1.jpg.html
 
Hope you like & happy listening
demand better audio
 
[link to photobucket updated]

 
Those look amazing....but what do they sound like.
 
Could you send me a pair to demo? I'm serious!