-
-
fleasbaby replied to the thread post your grado mods.....You can make a decent grill from a mesh pencil holder if you use some tin-snips to cut it up. You're going to need to get the drivers... -
fleasbaby replied to the thread post your grado mods.....Short answer, yes...there will be enough wires in there to go balanced :). Check out Grado's product page for the PS2000e...
-
fleasbaby replied to the thread The "non-Grado" Driver Grado Thread.@7keys Amen..plenty of options. @DomDOMT I've never seen any of the Beyer drivers in a radically open-backed design like the Grado one...
-
There are many start at beginning and good luck.
-
Shout out to @fleasbaby for the gorgeous cups seen here - the man does nice work
-
Another reason for lower bass is that the vast majority of Grado cushions are open cell foam. Whereas, the vast majority of cushions...
-
fleasbaby replied to the thread post your grado mods.....The cups look great. The lack of bass is could be because you don't have a chamber directly behind the driver (notice how normal Grado...
-
This is an extremely valuable and detailed thread. Thank you very much for this information
-
Just got these put together - thanks to @fleasbaby for the beautiful work on the cups. Other materials include R1 drivers from Eleven...
-
-
24ohm FreeEdge 50mm Denon-style drivers plus my Drillium baffles (which don’t really hurt or help) Grado salad bowl pads seem best...
-
I've had good luck using very small pieces of electrical tape to remove these little driver wrinkles. Also, great work by Wabi Sabi on...
-
Running nicely off my new handbuilt 4.4 RCA for head-fi cable even. Don’t try silicon surgical tubing unless the wire is solid and...
-
fleasbaby replied to the thread Gradoesque, meet Denonesque?!.The reduction in volume in the chamber behind the driver, and the narrowing of the vent hole in the outside face, might also be getting...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
