Got the Shakes
500+ Head-Fier
Can I use the all method to capture one or two speakers at a time? Man do I ever wish that async mode was enabled. Well I guess it's technically enabled, but there is no way to actually do the measurements.
Can I use the all method to capture one or two speakers at a time? Man do I ever wish that async mode was enabled. Well I guess it's technically enabled, but there is no way to actually do the measurements.
The asynch mode was designated to be filled out in a later update. Didn't see anything regarding any interface either. Looks like the only way to run it right now is through that tiny little window on the front panel which promises to be an ultra major PIA. Can't believe they could not have put in a Windows/MAC interface app. Just not good enough for a high end professional product.I have not thoroughly read the A16 manual yet (you will likely beat me), but you could with the A8. A lot of the menu wording seems to have been changed. Probably just because of the expanded set of features, but some of it seems needlessly more complicated.
How does Logitech get the codes of the A16 remote?
That's probably only wish fulfillment on their part after parrying off all those emails over the years.From the manual
"The cable could wind around your neck and cause strangulation."
That's just downright disconcerting
Just PEQ each loudspeaker before you take your PRIR. See, problem solved!It seems that there are no PEQs per (virtual) loudspeaker channel at all!
This is very, very bad!
I hope I just missed something. Have to read it carefully over the next days.
We were hoping to use the A16 PEQ as an alternative because measuring a complete system with it's PEQ is very difficult to impossible without 15.1 digital sweeps, and without 15.1 analog inputs on the AV Receiver or analog inputs that are bypassing all digital processing!Just PEQ each loudspeaker before you take your PRIR. See, problem solved!
I assume it has not been implemented yet, I already suspected that from the update.Has anyone noticed language in the manual related to an output mode for driving balance headphones? I've scanned through and haven't seen anything.
We were hoping to use the A16 PEQ as an alternative because measuring a complete system with it's PEQ is very difficult to impossible without 15.1 digital sweeps, and without 15.1 analog inputs on the AV Receiver or analog inputs that are bypassing all digital processing!
From what I can tell from the manual HDMI pass-thru is video only?