I'm curious, why would you buy SR80e when you already own SR80i and several much more expensive headphones (RS1, GS1000 etc)?

  Keep in mind, open headphones like Grados leak a lot of sound, and don't isolate at all, so they aren't always a good fit for portable. (Everyone will hear your music, and you will hear everything around you.)   Grados are also pretty easy to drive; for the same price you'd be better of...

  Well I figured either a) someone has tried it and it worked great or b) someone could point me to a portable amp that actually works with HD650.    Seems like every portable amp is made for 16-150 ohm...

FiiO E18 to go with HD650, yay or nay?   I'm asking since the recommended impedance for the E18 is 16 to 150 ohm...

  Not to derail the thread but have you used these with HD650 by any chance?

  I actually don't; I really found my SR225 to have the Grado signature sound, and every step up only offers marginal improvement.   Of course you'll find people on this forum who say the difference is 'day and night' but keep in mind those are the same people who claim to hear drastic...

Given these prices, I think the SR225e are your best bet. Grado's sound very different than Sennheisers so it's probably not worth it to spend a lot on them if you don't know whether you like them or not.    It seems quite a few people on this forum think the RS1e are worse than the RS1i which...

For me the biggest problem in all of this is that it has become hard to find useful information.   For example, I used to own ER4S and K501s. The ER4S pretty much need an amp to be able to listen to classical music at acceptable volume out of a smartphone. So after a bit of research, I had...

  Yes, the II preceded the II+. I swapped the tubes and the buzzing switched channel. I replaced the tube at some point.

-Little dot II (not MKII)   -Within a year one of the tubes started making a buzzing sound on the right channel.   -After moving to a new place, when I plugged it in it started making a pretty loud noise. Smelt like burnt plastic and stopped working altogether after 2 years of ownership. Did...

Ah, just got a pair of RS2e's and sure enough, just like my Sr225 from 10 years ago, the left cord is shorter than the right :P

So I tried changing the filters on my ER4... and only the green screen came off. The metal ring is stuck in and is preventing me from inserting another filter, and I can't find a way take it out. Dirt will inevitably get in without a filter ; should I just go ahead and buy another pair...

According to the official Little Dot forum (www.little-tube.com), the tubes they used don't glow. That was my biggest disappointment when I received my LD2 . The front tubes also stay cold on my amp ; my guess is that it's how it's supposed to be.

I was also disappointed on the day I received my ER4Ps because the triflanges were way too big... I also found the bi-flanges on the ER6 much easier to wear I have to cut the little tip off the tri-flanges to be able to insert them ; try it. They soften up after some time ; took me about...

Quote: Originally Posted by g1981c well no, you will have to do better than that because for $975 i can get Benchmark DAC1 which is a source AND a headphone amp ... and im reasonably certain that you will never get even close to its quality with a Headroom Max Balanced. you have to...

The mobile line is on sale at headroom, so you could get an Airhead for 99$. http://www.headphone.com/products/he...e-mobile-line/

According to the 30 days guaranty, I should call them and they'll send another one ASAP with a return shipping label so i can send them the defective one. Weirdly enough the box was in perfect condition. I found out I can actually hear something from the left driver by holding the earpiece at...

Sigh... I ordered from headroom on sunday night, they arrived today... And they're broken! The headband is bent in a weird way, and the left driver does not make any sound at all! Damn... Why do these things always happen to me?

Quote: Originally Posted by blessingx To be fair the ER4P does benefit from an amp and the iPods power the ER4S fine without an amp (just better with). Classical music is often recorded at "low volume" (someone posted an article about this ; they do so to preserve the dynamic...

Quote: Originally Posted by diredesire the percentage means how much the resistors will "drift" values when they are in use and/or heated (with current running through them) The lower the value, the more true to it's value it will stay. I am aware of that, this is actually...

I searched the forum and all I could find was a link to this page : http://www.fixup.net/tips/ety/ety.htm The page suggests using two 0.1% 75 ohm resistors. The ER4P have an impedance of 27 ohm and the ER4S 100 ohm. Why bother using 0.1% resistors if they aren't the exact needed value (i.e...

My ER4P arrived today! I love the sound, although I find them harder to wear than my ER6... What I'm concerned about is the price. I first saw them on a website for 215$ USD. Not bad, I thought ; let's buy them! Plus shipping, 224$. Converted to CAD, that's 266,23$. Still okay, I guess...

Quote: Originally Posted by kwitel Got home and put em on to listen to some Philip Glass (violin concerto) and noticed that more violin was in my left ear than my right! Could be the recording...but now I feel like everything is kind of "left side" biased. For some reason lots of...

Is it me or the 2 wires are not soldered on the right spots on the power supply? From Tangent's website (keep in mind your pic is reversed) :

Google for Microsoft Anti-Spyware and get AVG at www.download.com These two with Norton AV (assuming you have the latest virus definitions on all 3) should get rid of any viruses you might have.