[Poki]

Audeze iSINE10 In-Ear Headphone B stock with both Lightning and standard cables $149.00 - US Only
https://www.audeze.com/products/isine-series/isine10-ear-headphone#buy-now-section

Click "B-Stock"

 

[PlantsmanTX]

Amazon has just lowered the price of their exclusive Sennheiser HD-599se open back headphones to $102.56. So, $17 less than the HD-600 refurbs which Nigel Tufnel would point out only go "1" more.

The long discontinued HD-598SE and more recently discontinued HD-598SR seem very similar and are going for quite a premium.

What's the difference between the SE and the regular model?

EDIT: Never mind, I see the difference.

 

[kenchar]

Some Cowon DAP discounts @ Amazon.

Cowon Plenue D -- $99 -- Prime Member exclusive price only. For those who are not Amazon Prime Members just sign up for a free 30-day trial and cancel it afterwards. You'll still be able to use the full length of the 30 day trial and receive special member pricing even if you cancel early. -- https://www.amazon.com/Cowon-Plenue-Resolution-Player-Silver/dp/B01A8NU5GM/

Cowon Plenue R -- $271.20 w/20% off coupon -- https://www.amazon.com/Plenue-Player-Polaris-Silver-Bluetooth/dp/B075ZGVHDT/

Cowon Plenue 2 -- $479.20 w/20% off coupon -- https://www.amazon.com/Cowon-P2-128IS-Plenue-Player-Imperial/dp/B071RM41RF/

Thanks for this!

Got the Plenue 2....great DAP for the price.

Ken.

 

[LCMusicLover]

Thanks for this!

Got the Plenue 2....great DAP for the price.

Ken.

This!

Seriously, at that price I considered purchasing a second one, just 'cuz.

Kinda painful when I recall that I paid more than twice that not so long ago. Lucky I'm getting forgetful as I get older

 

[groucho69]

https://store.hifiman.com/

https://www.ebay.com/str/headdirect

https://amazon.com/s?me=A1GH37DDIGH3L6&sa-no-redirect=1

 

[OldDude04]

I got my HE-560 headband in earlier today (thanks again @PlantsmanTX), and I've already done some bending and it's attached to my modded M1060's. I had a LCD-2 leather headband and yoke assembly on them before, and I had to drill out a bit of wood to use the Audeze yoke screws. That worked in my favor because with the HiFiMan headband, I am still using those screws. I just had to bend the ends of the yokes to set more flush to the M1060 and boom, new headset. Now, I'll probably have to paint the section of the 2 orange bands and the black in-between them to remove the HFM logos and text. Anyway, here are a few pics:

 

[Slater]

I paid way too much for my 2x 400gb I learn the lesson... I will wait for the 1gb to go on sale ($449 right now)

You don’t even want to know what I paid for my 2x256GB Samsung micro SDs when they 1st came out.

 

[Kundi]

You don’t even want to know what I paid for my 2x256GB Samsung micro SDs when they 1st came out.

I do

 

[Cruelhand Luke]

I do

Noooo, it will just blow your mind you fool!

 

[PlantsmanTX]

I got my HE-560 headband in earlier today (thanks again @PlantsmanTX), and I've already done some bending and it's attached to my modded M1060's. I had a LCD-2 leather headband and yoke assembly on them before, and I had to drill out a bit of wood to use the Audeze yoke screws. That worked in my favor because with the HiFiMan headband, I am still using those screws. I just had to bend the ends of the yokes to set more flush to the M1060 and boom, new headset. Now, I'll probably have to paint the section of the 2 orange bands and the black in-between them to remove the HFM logos and text. Anyway, here are a few pics:

You're very welcome...looking good!

 

[Th3Drizzl3]

looks great like that minus the logo. i got mine also yesterday. i have 4 backups now lol. appreciate the link!

 

[Ggroch]

I got my HE-560 headband in earlier today....

Does anyone know a source for the screw sets....or perhaps an idea on other screw combos that will work. I have an original 560 with the plastic yokes...so no screws. My original band has been fine so far, but I would hate to have it break when I try to remove it and then not have the hardware to put on the replacement.

 

[OldDude04]

Does anyone know a source for the screw sets....or perhaps an idea on other screw combos that will work. I have an original 560 with the plastic yokes...so no screws. My original band has been fine so far, but I would hate to have it break when I try to remove it and then not have the hardware to put on the replacement.

It's been a while since I owned my gen 1 560's so I don't know if it would work for you, but I used THIS kit to mod my M1060 to accept the Audeze yokes. I'm still using the pieces in the pic below with the new headband, minus the Audeze yoke rods. I drilled a hole for the pieces on the left to be pressed into the headphones. (Drilled the hole very slightly smaller than the cylinder size so it stayed in place when pressed in). It was a pretty simple process.

 

[Th3Drizzl3]

our lowes has some pretty tiny allen head screws. not sure if they have ones that will fit but worth a shot. might just have to be shortened a bit

 

[gemNeye]

A few Amazon coupon deals that might be of interest:

Schiit Jotunheim Balanced + Multibit -- $574 w/ $75 off coupon -- https://www.amazon.com/Schiit-Jotunheim-Headphone-Amplifier-Balanced/dp/B07KX7FYGF

Hidizs AP80 DAP -- $135.99 w/ $14 off coupon -- https://www.amazon.com/HIDIZS-AP80-Ultraportable-Bluetooth-Resolution/dp/B07HFQDYQP

Hidizs Sonata HD Portable DAC/AMP -- $35.99 w/ $10 off coupon -- https://www.amazon.com/HIDIZS-Portable-Headphone-Amplifier-Smartphone/dp/B07F2DTTGT