Just curious, which wireless Bluetooth dongle are y'all using?
Ehh the stock one? Literally there is a Koss Porta Pro Bluetooth that has it's own built in dongle,
Just curious, which wireless Bluetooth dongle are y'all using?
Ehh the stock one? Literally there is a Koss Porta Pro Bluetooth that has it's own built in dongle,
I'll be darned...
Right! Yes as others have mentioned it's a tiny bit noisy in quiet settings but I use my pretty much exclusively while in Public spaces so I've no qualms with it at all
My wife really likes the Parts Express headband for her Koss. I'll have to take those drivers, with dongle, off the stock headband and put them on the Parts Express for her!
Just like the ksc75 which can be put on the parts express headband, can the porta pro be done too? On the same parts express band? While replacing the pads on the porta pro I noticed it seems to be similar, but not completely sure and wanted to check.
Yes they can.Just like the ksc75 which can be put on the parts express headband, can the porta pro be done too? On the same parts express band? While replacing the pads on the porta pro I noticed it seems to be similar, but not completely sure and wanted to check.
1. Porta Pro (Yaxi pads, Parts Express headband, custom strap) - cleans up the low end and better extension at both ends, adds more intimate vocals, slightly more open sounding/more separation, and a tad bit more treble. MUCH more comfortable than stock as well.
2. KSC75 (Yaxi pads, Porta Pro headband) - adds more low end and takes away a little treble... smoother & more balanced sounding than stock with more a little more weight behind the sound.
Awesome. Very nice instructions!Pull it off in a horizontal direction (the headband and wire is orientated 90 degrees from the direction you should pull them off) ... see these pictures which might help:
http://phimusic.blogspot.com/2015/12/koss-porta-pro-cable-replacement-guide.html
If you look at the parts express headband you'll see the horizontal slot in the socket area the driver will pop into - you can use that as reference for the horizontal direction you should only move the drivers in. Also the Porta Pro plastic piece holding in the driver needs to be braced so you dont bend/break it...I used one finger to support the floating end while tilting the driver to the floating end and pulling it to pop it out. They will pop right out with some force... always hardest the first time.
...Also the Porta Pro plastic piece holding in the driver needs to be braced so you dont bend/break it...I used one finger to support the floating end while tilting the driver to the floating end and pulling it to pop it out...