some good eartips for KZ Zs3 , looking for more comfort
thank you
thank you
sure your buddy would do a perfect job about that.
pity you don't appreciate my fr measurements of zs5v1 with 3 different sources (the link is immediately above your post): <1Ω, <1Ω+coupling caps, 15Ω (near +5dB harsher @ 11kHz).
zs5 source dependency: https://www.head-fi.org/threads/kno...essions-thread.698148/page-1553#post-13777918
i'm tired of re-posting these measurements, and it's even stupid to do it.. people read what they want to read..
fr measurements of zs5v1 with 3 different sources (the link is immediately above your post): <1Ω, <1Ω+coupling caps, 15Ω (near +5dB harsher @ 11kHz).
zs5 source dependency: https://www.head-fi.org/threads/kno...essions-thread.698148/page-1553#post-13777918
Comply foam tips make a HUGE difference in my experience, just get the right size for youguys how can I improve the bass of kz zs6 anyone have some suggestion for tips I cant get a good seal with kz zs6 thanks
The included "starline" tips are actually quite good and highly appreciated here - I just ordered some more from aliexpress. You will have to find out for yourself whether you like comply foam tips. I personally do not, and many others don't either.guys how can I improve the bass of kz zs6 anyone have some suggestion for tips I cant get a good seal with kz zs6 thanks
Same problem. I use QKZs foam tips. But still can't get enough bass from the zs6. Bass is not a best side of the zs6. But in everything else - they rock.I tryed many tips for kz zs6 but only foam tips helps but other tips I dont get bass with it I am driving the kz zs6 from a smartphone... compared with kz es3.. the kz es3 got a lot bass with equalizer but with kz zs6 its very on the weak side...
high impedance output source alter treble due to its interaction with zs5v1 impedance, particularly with their BAs' impedance (treble). bass alteration is minimal in comparison, because the impedance of the dynamic driver is flat (the big bass roll-off in the graphs, are due to the source's tiny output coupling caps, not due to its output impedance, which is <1ohm, btw) .I'm familiar with your posts and I'm taking the oportunity to thank you again for all your hard work.
Do you care to elaborate a bit and explain the reasoning for high impedance output source in ZS5's case would more likely alter treble (and also bass but to a lesser extent)?
Can it be the effect of distortion from an sub-unity damping factor because it seems counterintuitive to me (and inconsistent with some user reports) as treble should be more stable in my opinion.
Regarding ZS6 I remember one of the users reporting terrible SQ loss when trying to tame the highs with various impedance adapters.
Haven't seen many reports from real-life users of this scenario though.
There's something more at play here or maybe I'm looking at it the wrong way.
I tryed many tips for kz zs6 but only foam tips helps but other tips I dont get bass with it I am driving the kz zs6 from a smartphone... compared with kz es3.. the kz es3 got a lot bass with equalizer but with kz zs6 its very on the weak side...
it's easy to reach better isolation with foams, and foams help to tame some highs frequencies (resonances). the result is bassier.Same problem. I use QKZs foam tips. But still can't get enough bass from the zs6. Bass is not a best side of the zs6. But in everything else - they rock.
Thank you for your advice, but do you really think that i still didn't try it?it's easy to reach better isolation with foams, and foams help to tame some highs frequencies (resonances). the result is bassier.
but you can try to close inner vent hole (completely, or partially, using tape, for instance), if that vent hole is not occluded with your ear walls yet. if completely closed, you might experience driver flex (then you can punch the tape with a needle, minimal hole, just to avoid the flex).
dunno and didn't know.. remembered some of the fast tweaks and liked to remind them just in case.. i'm plenty satisfied with zs6 bass though, and like to use some eq rather than other methods when needed (faster and easier for me).. but this is my own experience.. i'm sure you have tried everything, keep on it and you'll get successThank you for your advice, but do you really think that i still didn't try it?
You're right about the methods of improving sound of the zs6 - I do not argue about this. But i guess that zs6 are simply not a so bassy model as i want. That's all. I like (very like) how it sounds in electronic music. But if i want to find a really bassy model, i have to look for something else. So i'm waiting for a new models from KZ. But i like the zs6 as they are.dunno and didn't know.. remembered some of the fast tweaks and liked to remind them just in case.. i'm plenty satisfied with zs6 bass though, and like to use some eq rather than other methods when needed (faster and easier for me).. but this is my own experience.. i'm sure you have tried everything, keep on it and you'll get success
You're right about the methods of improving sound of the zs6 - I do not argue about this. But i guess that zs6 are simply not a so bassy model as i want. That's all. I like (very like) how it sounds in electronic music. But if i want to find a really bassy model, i have to look for something else. So i'm waiting for a new models from KZ. But i like the zs6 as they are.
P.S. sorry for my english, i'm kinda drunk *_*