[Pastapipo]

Sound like fun, lets get in contact when you're back home. Don't be afraid to remind me if I forget, after all I'm an old man

Haha, no you're not. Or is this because of my "when I'm 64" comment? Which was just a (bad) Beatles reference joke without any judgement of age.

 

[abhijollyguy]

Received HLSX and have not found any sibilance till now. Bass is above neutral but wait this is what the hybrid is all about. No?

 

[audio123]

how is hlsx sound compared to flc8s

 

[MuZo2]

  Received HLSX and have not found any sibilance till now. Bass is above neutral but wait this is what the hybrid is all about. No?

you also have FIDUE A83, some had compared HLSX to FIDUE A83 and also to K3003. What do you think of HLSX?

 

[peter123]

Haha, no you're not. Or is this because of my "when I'm 64" comment? Which was just a (bad) Beatles reference joke without any judgement of age.

Wasn't refering to that comment since I didn't remembered it lol. Kind of says it all ha ha 

 

[Saoshyant]

 
Hmm. I thought the Rockets had a more linear and neutral sound. i had the zero and did not find them to be either of those.
I've seen review comparing the Rockets to the Shure SE535 which I did not think was similar to the Zero sound. Maybe a similar tuning but that's really about it IMO?
Either way, its' good to have multiple opinions, so glad I asked.
 
Looking for something more for studio monitoring/recording so I'm looking for something really closer to an Etymotic sound probably. I had thought the Rockets were pretty linear but a little more exciting than the Ety sound.

 
Did you perhaps get in on the RE-00 Massdrop?  The Ety HF and RE-0 are two of the best sub-100 neutral IEMs, and the RE-00 being a $35 rerelease, will hopefully be neutral as well.  Then again, I believe the RE-00 drop just ended.

 

[robervaul]

Hey Guys. The manufacturer answered me.

Answering doubts about BK33 and HLSX808 as follows:­

1. About BK33 and BK35, Actually it's teh­ same model, just BK35 is the second gene­ration, it's updated based on the BK33.

2.The difference between HLXS808 and BK35

(1).drivers:­
BK35 driver: 10mm wooden vibration dynamic Driver+AHC Balanced Armature Unit
HLSX drivers: 10mm dynamic Driver+AFK Balanced Armature Unit

(2).Specification:­

BK35:­
Impedance: 32 Ω ­
- Frequency Response Range: 5Hz-28000Hz­
- Sensitivity: 112dB/mW ­
- Plug: 3.5mm Stereo Gold-plated plug ­
- Cable length: 120cm or 48 inches­

BLSX808:­
Impedance: 17 OHM ­
- Frequency Response: 8 Hz-25000 Hz ­
- Sensitivity: 108 dB/1mw ­
- Plug: 3.5mm Stereo Gold-plated plug ­
- Cable length: 120cm or 48 inches­

(3). The sound signature of BK35 is better than HLSX808's

3. We have our own factory, we design and­ produce the earphone. We accept OEM and­ODM. i.Vallux is one of our distributor in Amazon. For the MOQ 100pcs, we could help to­mark the logo.

For those who have tried HLX 808 you will definitely want to try the Wood too. I sent a message to the seller and got an irresistible discount only mentioning that I am a head-fi member.

http://www.aliexpress.com/store/product/2016-New-HLSX-Hybrid-10mm-Dynamic-Balanced-Armature-BA-Dual-Driver-In-Ear-IEMS-Wood-Hi/519064_32651802306.html

 

[CoiL]

M`kay... thanks for sharing! But...

(3). The sound signature of BK35 is better than HLSX808's

Says who? with what gear? what music? It`s totally subjective 

 
But... I`m totally interested in trying BK35. Wish I would have known this information before ordering 808. Oh well, anyway, 808 gets still positive feedback, so, I`m fine with it 

 
 
I wonder what`s the difference between AHC & AFK BA driver?

 

[crabdog]

  M`kay... thanks for sharing! But...
Says who? with what gear? what music? It`s totally subjective 

 
But... I`m totally interested in trying BK35. Wish I would have known this information before ordering 808. Oh well, anyway, 808 gets still positive feedback, so, I`m fine with it 

 
 
I wonder what`s the difference between AHC & AFK BA driver?

Me too. I'll be following the BK35 closely.

 

[robervaul]

M`kay... thanks for sharing! But...
Says who? with what gear? what music? It`s totally subjective :rolleyes:

But... I`m totally interested in trying BK35. Wish I would have known this information before ordering 808. Oh well, anyway, 808 gets still positive feedback, so, I`m fine with it   

I wonder what`s the difference between AHC & AFK BA driver?

The manufacturer Magaosi told me.
About the AHC & AFK I'll check.

 

[452293]

M`kay... thanks for sharing! But...
Says who? with what gear? what music? It`s totally subjective :rolleyes:

But... I`m totally interested in trying BK35. Wish I would have known this information before ordering 808. Oh well, anyway, 808 gets still positive feedback, so, I`m fine with it   

I wonder what`s the difference between AHC & AFK BA driver?

This is the spec of the AHC BA unit http://www.china-armature.com/m/productInfo.php?id=2
I couldn't find spec for AFK BA unit. But like I said before the AHC BA unit on the BK35 is larger than AFK BA unit on 808 according to HLSX founder/sound engineer.

 

[Saoshyant]

M`kay... thanks for sharing! But...
Says who? with what gear? what music? It`s totally subjective :rolleyes:

But... I`m totally interested in trying BK35. Wish I would have known this information before ordering 808. Oh well, anyway, 808 gets still positive feedback, so, I`m fine with it   

I wonder what`s the difference between AHC & AFK BA driver?

Anytime I read anything on here, I always assume an IMO. Then again, some people insist IMO be written every single time, which to me is just redundant. It's like asking for verification that someone walking down the street is breathing.

 

[CoiL]

 
AHC BA unit on the BK35 is larger than AFK BA unit on 808 according to HLSX founder/sound engineer.

And I think I read one post in here stating that bette vs. 808 had different size BA in them according to visual inspection (or am I mistaking bette with wooden HLSX?). Now, I wonder if bette has larger BA driver than 808 and if it is, then could it be the same as on BK35?

 

[crabdog]

  And I think I read one post in here stating that bette vs. 808 had different size BA in them according to visual inspection (or am I mistaking bette with wooden HLSX?). Now, I wonder if bette has larger BA driver than 808 and if it is, then could it be the same as on BK35?

There was an 8mm bette and a 10mm. One or two people on here said that the 8mm one was no good.

 

[CoiL]

Yeah, but, I`m talking about BA size atm not DD size. This i.Valux Bette 8 & 10mm DD vs. HLSX808 & BK35 is getting really confusing...