2359glenn | studio
Jul 11, 2016 at 8:18 AM Post #13,756 of 39,983
  Welcome back, Glenn.
 
I assume when you step on the scales, after coming back from Greece, the number is higher than when you left to go there.   
tongue.gif


Not yet I have shirts that fit before I left not any more.
I will get on a scale at work afraid to maybe I beat last time 15lbs in 10 days.
 
Jul 11, 2016 at 9:21 AM Post #13,758 of 39,983
  Hi Ken I am home buy the way.
Yes the 6AH4 is 1/2 of a 6BL7.
Another goodie is the 6CK4 is 1/2 a 6AS7 but sounds better.

 
Welcome back! :)
 
I noticed that the plate structure resembled the 6BL7 and the heater current of 0.75 A, one-half that of the 6BL7, and so I wondered if the 6AH4 might be one-half of a 6BL7. However, what threw me off is the amplification factor, only 8 for the 6AH4 but 15 for the 6BL7. I thought that each section of the 6BL7 had a mu of 15, but now I wonder if perhaps the mu of a double triode is simply the sum of the two sections?
 
Edit: Just checked the 6J5, one-half of a 6SN7, and it has a mu of 20, the same as the 6SN7. So for some reason the 6AH4 has one-half the mu of a 6BL7...
 
Jul 11, 2016 at 9:23 AM Post #13,759 of 39,983
 
Big food, big family, big love. Good to see that Glenn and Stavros continue to perpetuate all that is family—be it amps, food, company or otherwise.

 
Hi Clayton, we hope you'll join us one day.
 
 
Not yet I have shirts that fit before I left not any more.
I will get on a scale at work afraid to maybe I beat last time 15lbs in 10 days.

 
Could be worst Glenn..........I'll have to try harder next time.
 
 
No tubes from Stavros even though he has one of the best collections I ever seen.

 
Still a long way to go.
There is no hope for tube addicts.
 
Jul 11, 2016 at 9:56 AM Post #13,760 of 39,983
i will put to run Glenn and Stavros.
The tube´s closet of Stavros is like Fort Knox.
and in the end: Portugal european champion!!!!!!
beerchug.gif

 
Jul 11, 2016 at 10:39 AM Post #13,761 of 39,983
  i will put to run Glenn and Stavros.
The tube´s closet of Stavros is like Fort Knox.
and in the end: Portugal european champion!!!!!!
beerchug.gif

Ha ha....all of those tubes + an amp from Glenn = One helluva good time.
 
Jul 11, 2016 at 1:37 PM Post #13,762 of 39,983
  i will put to run Glenn and Stavros.
The tube´s closet of Stavros is like Fort Knox.
and in the end: Portugal european champion!!!!!!
beerchug.gif

 
 
Well done Portugal.....
bigsmile_face.gif

  Ha ha....all of those tubes + an amp from Glenn = One helluva good time.

 
Make that three............
 
Jul 11, 2016 at 2:00 PM Post #13,763 of 39,983
Jul 14, 2016 at 8:45 PM Post #13,766 of 39,983
Glenn,
 
If one 6AS7 draws 100ma, it seems to me that four would draw 400ma. However, the tube rectifiers available to us can provide at most 350ma (3DG4). So I wonder... What kind of magic allows me to run two pairs of 6AS7 in your OTL?
 
Jul 14, 2016 at 11:17 PM Post #13,767 of 39,983
Glenn,

If one 6AS7 draws 100ma, it seems to me that four would draw 400ma. However, the tube rectifiers available to us can provide at most 350ma (3DG4). So I wonder... What kind of magic allows me to run two pairs of 6AS7 in your OTL?


I seem to remember Glenn offering to make a tube socketed device that had the SS rectifiers in it, That should do it, 'eh?

You could then switch back and forth from Tube to SS rectification....

.
 
Jul 15, 2016 at 8:01 AM Post #13,768 of 39,983
  Glenn,
 
If one 6AS7 draws 100ma, it seems to me that four would draw 400ma. However, the tube rectifiers available to us can provide at most 350ma (3DG4). So I wonder... What kind of magic allows me to run two pairs of 6AS7 in your OTL?


Hi Ken
There is one cathode resistor when the two tubes try to draw more current through this resistor the voltage drop across it increases. This raises the negative grid voltage
decreasing the current through the tubes. but the impedance of the output still goes down.
 
Jul 15, 2016 at 8:04 AM Post #13,769 of 39,983
 
Glenn,

If one 6AS7 draws 100ma, it seems to me that four would draw 400ma. However, the tube rectifiers available to us can provide at most 350ma (3DG4). So I wonder... What kind of magic allows me to run two pairs of 6AS7 in your OTL?


I seem to remember Glenn offering to make a tube socketed device that had the SS rectifiers in it, That should do it, 'eh?

You could then switch back and forth from Tube to SS rectification....

.


Yes I can make SS rectifier substitutes made with HEXFRED rectifiers they are rated at 6 amp 1200 volts.
 
Jul 15, 2016 at 8:08 AM Post #13,770 of 39,983
 
Yes I can make SS rectifier substitutes made with HEXFRED rectifiers they are rated at 6 amp 1200 volts.

Wonder if there will be any changes in sound with HEXFRED, are these compatible with PY500A, can you sign me up for a pair too :)
 

Users who are viewing this thread

Back
Top