richard51
Headphoneus Supremus
- Joined
- Jul 21, 2013
- Posts
- 2,339
- Likes
- 863
i second that...Good idea...
You can just use https://translate.google.com/ or http://www.bing.com/translator/, or some browsers have it built in, where it's as simple as right clicking on the page and clicking "Translate to English.Uh yeah, about that, seems there is no translate widget to be found there. Perhaps if you did a translate yourself and hotlinked to that it may be of help.
Uh yeah, about that, seems there is no translate widget to be found there. Perhaps if you did a translate yourself and hotlinked to that it may be of help.
Is the stack like this?Hello, I’m looking to fit the DT1350 and a cypher Labs stack in a pelican case. Could you guys help me out with measurements to find the right pelican case for this setup?
Is the stack like this?
https://duckduckgo.com/?q=Cypher+Labs+stack&t=vivaldi&iar=images&iax=images&ia=images&iai=http://www.touchmyapps.com/wp-content/uploads/2012/05/CLAS-ALO-National-DT1350.jpg
Maybe the 1085 would fit it.
http://www.pelican.com/us/en/product/watertight-protector-hard-cases/hardback-case/laptop-case/1085/
Or would that be a little big? The DT1350 measures about 6 1/4" wide by 7"-ish longways.
I looked at the 1075 (netbook case) and it seemed like it might be too small: http://www.pelican.com/us/en/product/watertight-protector-hard-cases/hardback-case/laptop-case/1075/
If both the dac and amp need to be side by side on the right or left of the phones. Just have to place them together and measure their width and length and then see how it compares to the specs on their site, and make sure it's about 3-and-half centimeters high for the headphones I guess, but I don't have any experience with these cases and know how soft the cushioning is inside.
That might be too tight on the "length" of the headphones, which I measure to be about 6 and a half inches when pushed in. The 1075 offers more space, but as you point out, less depth.Hello, it will be a stack that consists of the solo, RX MKII, and iPod Classic paired with the dt 1350. I’m not sure if the laptop cases will be “deep” enough to fit everything. I was hoping that something like the pelican 1170 or a bigger model would fit everything.
Probably better off to use the external measurements of the case they come with.
I own both. I much prefer the DT1350. I value efficiency, PRaT, isolation, and portability in closed cans. I also have a high tolerance for on-ear headphones.How do these compare to the DT250's?
I believe they are the EDT 1350 SLSorry to resurrect this once active thread, but I have some questions about the DT 1350 Limited Gold Edition. I was under the impression they were the same as DT 1350 but with different color caps on the earcup, but I don't see any information about them on the Beyerdynamic website.
I see conversation in the thread about the earpads being 63 mm with the option to get the 67 mm versions shown on the website. I measured mine to be 57 mm. I asked Beyerdynamic about these and I didn't get a response from them. I'd like to change out to the 67 mm earpads but I'm trying to get clarification before doing anything else. I know there was more than one version of DT1350 in its history, and some reports of wide variation between units. I've been using these for a month now, and the bass seems very thin, with a lot of peakiness and ringing in the upper midrange, so I don't know if this is configuration related or can be improved.
Sorry to resurrect this once active thread, but I have some questions about the DT 1350 Limited Gold Edition. I was under the impression they were the same as DT 1350 but with different color caps on the earcup, but I don't see any information about them on the Beyerdynamic website.
I see conversation in the thread about the earpads being 63 mm with the option to get the 67 mm versions shown on the website. I measured mine to be 57 mm. I asked Beyerdynamic about these and I didn't get a response from them. I'd like to change out to the 67 mm earpads but I'm trying to get clarification before doing anything else. I know there was more than one version of DT1350 in its history, and some reports of wide variation between units. I've been using these for a month now, and the bass seems very thin, with a lot of peakiness and ringing in the upper midrange, so I don't know if this is configuration related or can be improved.