Show us your Head-Fi station at it's current state. No old pictures please...
Oct 6, 2015 at 9:33 PM Post #20,296 of 41,132
   
I'm happy for you Jay. Enjoy!! I'm enjoying mine. 
biggrin.gif

Thanks. Mine is still warming up, but I have no complaints while it's cold--right from first start up.
 
Oct 7, 2015 at 2:46 AM Post #20,298 of 41,132

 
Oct 7, 2015 at 11:39 AM Post #20,301 of 41,132
New purchase - Cables for my LCD-3! The original cables broke (both) so I had to replace them with a sturdier cable :) Got it from ebay, also a 4pin female to 1/4 plug extension cable so I can connect it to single ended amps aswell!
 

 

 
Oct 7, 2015 at 6:20 PM Post #20,302 of 41,132
Oct 9, 2015 at 6:25 PM Post #20,303 of 41,132
Big changes since I last posted my rig a long time ago.
The Pro-ject turntable is still present but has been fitted with an acrylic platter and uses the old platter as an additional plinth and is now fitted with an Audio Technica AT-F7 cartridge.
The turntable goes through the Musical Fidelity X-LPS, X-PSU and X-CAN. The Cambridge Audio NP30, Sony ST-S3000ES, Sony MDS-J3000ES, Teac PD-H500i and Teac R-H500 go through the Denon DA-300USB and still have my Sennheiser HD650 headphones. A hidden Mac mini is connected to the Denon and is remotely controlled by a Galaxy Tab Pro S.

 
Oct 10, 2015 at 11:03 AM Post #20,304 of 41,132
New purchase - Cables for my LCD-3! The original cables broke (both) so I had to replace them with a sturdier cable :) Got it from ebay, also a 4pin female to 1/4 plug extension cable so I can connect it to single ended amps aswell!







Bravo!!
What's your impression in comparison to stock cables?

Is it little dot that you're running your LCDs from?
 
Oct 10, 2015 at 12:45 PM Post #20,305 of 41,132
  Big changes since I last posted my rig a long time ago.
The Pro-ject turntable is still present but has been fitted with an acrylic platter and uses the old platter as an additional plinth and is now fitted with an Audio Technica AT-F7 cartridge.
The turntable goes through the Musical Fidelity X-LPS, X-PSU and X-CAN. The Cambridge Audio NP30, Sony ST-S3000ES, Sony MDS-J3000ES, Teac PD-H500i and Teac R-H500 go through the Denon DA-300USB and still have my Sennheiser HD650 headphones. A hidden Mac mini is connected to the Denon and is remotely controlled by a Galaxy Tab Pro S.

lol the TEAC\sony setup make the pic look upside down :p
 
awesome system
cool.gif

 
Oct 10, 2015 at 3:01 PM Post #20,306 of 41,132
Fine looking system. Respectful stack of Teac half width components. I recommend adding one of AH 500 amps ( especially "i" variants) which you canfind driving your headphones better than anything else in this awesome setup. Try this. I'm planning to do this with my Beyerdynamic T1.

However, good as it can be.
 
Oct 10, 2015 at 3:54 PM Post #20,307 of 41,132
Bravo!!
What's your impression in comparison to stock cables?

Is it little dot that you're running your LCDs from?

It was actually that long ago since I listened to them thx to the original cables broke. So I can't really tell if there is any i'm afraid! And yes it is :)
 
Oct 11, 2015 at 5:42 AM Post #20,308 of 41,132

 
Finally need a better place for my setup (DIY Daphile box, Bifrost Uber, Gustard U12, iFi micro iCAN)
 
Oct 11, 2015 at 3:45 PM Post #20,309 of 41,132
My current head-fi station:
HD600s, MrSpeakers ETHER
Audio-GD Reference 7, Headroom Max (04/05 model) and my old DACMini which isn't getting much listening time at the moment. Waiting for the Liquid Carbon and trying to restrain myself from putting a deposit on the GSX MK2... :frowning2:
 

 
 
Interim setup, while I was hunting for the Reference 7 :)
Borrowing a friends M2tech Young, really gorgeous DAC -- was a bit sad parting ways with it.
 

 
 
Close up

 
Oct 11, 2015 at 8:24 PM Post #20,310 of 41,132
Love it but still in the market for a tube amp that will complete the setup. Not familiar with other cans coz i only use my hd650 and grados.


@basman
 how do you like your Apache and what's your favorite phone to listen to on it.  I have one and am thinking about getting new cans. currently using HD650's
 

Users who are viewing this thread

Back
Top