Happosai420
New Head-Fier
- Joined
- Feb 5, 2016
- Posts
- 33
- Likes
- 15
That's what I mean by updating through the device. Using the recovery menuЧерез рекавери установите прошивку 2.1.20
That's what I mean by updating through the device. Using the recovery menuЧерез рекавери установите прошивку 2.1.20
gmahler2u: Make sure it's plugged in all the way. It seems to be a tighter fit than some other connections I have.
Is it the cable or the DX120? Have you tried other 2.5 cables?I got a new pair of 2.5 cables, but not happy with the result. The sound quality is Superb. However, now it's dap causing the issue. I have listened to fellow headifer "Plugged all the way" The sound comes out one side or sometimes
both side. I just can't enjoy the balance side of Dx120. It really starting to get annoying.
Stay updated on iBasso at their sponsor profile on Head-Fi.
|
Is it the cable or the DX120? Have you tried other 2.5 cables?
It appears to be the DX120 then. I apologize for this. Depending upon when purchased and the sellers policies you may be able to get it replaced. Have you contacted the seller? You can contact me by email at paul@ibasso.com.I tried 2 other cables and same, I tried to plug the cable all the way. Still the same result. Now, it looks like a dap is the problem.
Stay updated on iBasso at their sponsor profile on Head-Fi.
|
It appears to be the DX120 then. I apologize for this. Depending upon when purchased and the sellers policies you may be able to get it replaced. Have you contacted the seller? You can contact me by email at paul@ibasso.com.
I've been having an issue for the past week or so, and I figured this would be the place to ask about it. A few days ago, the DX120 auto-shutdown, which is fine. However, after turning it back on, the screen would just stay black for a long time. After hard resetting, I was able to boot up, but my scans of everything were erased. I decided to upgrade the firmware at that point and did so through the device itself. I've been stuck in a boot loop ever since. I can't connect it to a pc since whenever I try to, the screen goes black, and the device becomes unresponsive. I'm able to boot into the advanced menu, and I've tried to use it to install a new upgrade to no avail. Has anyone encountered this before?
I'd suggest you to load full firmware image (any version you like from iBasso web site) using Rockchip FactoryTool. You may download the FactoryTool along with an instruction e.g. from here.Should I just return the DX120 then if this problem can't be fixed?
I'd suggest you to load full firmware image (any version you like from iBasso web site) using Rockchip FactoryTool. You may download the FactoryTool along with an instruction e.g. from here.
When using the Batch Tool to do an wipe and install, the DX120 isn't supposed to be on. If it freezes, you have it on.Thanks, but the DX120 freezes any time I try to connect to a computer. I have the Factory tool since I used it before for my DX80, but I haven't been able to use it now because of that. In trying to update any firmware, I did notice that one of the messages says that it is missing the trust.img. I'm not sure how I would add that.
When using the Batch Tool to do an wipe and install, the DX120 isn't supposed to be on. If it freezes, you have it on.
This. I paired both. Nice all-arounder, Right up my alley along with my Penon BS1 Official.spend a little more and buy the IT01s: it will be a perfect pairing with the DX-120!!