[snbrp]

I haven't it yet but read about. It has unlocked bootloader and you can install SuperSU via zip-file.

 

[dzlvs8]

Is the Google play store active on the Hiby R6s that everyone is receiving?

 

[Joe Bloggs]

Question for those playing DSD files, does the equalizer and/or MSEB alter the playback at all?

I'm able to change the tone of FLAC and MP3 but not DSD.
Is this how it's supposed to be?

You can force the equalizer and/or MSEB to function on all tracks by enabling "Fixed output sampling rate" and setting it to any one of the settings.

 

[Joe Bloggs]

Is the Google play store active on the Hiby R6s that everyone is receiving?

All units purchased through Indiegogo have a functioning Google Play out of the box. If you obtained your unit from the Chinese market it doesn't. But it can be added by following the instructions here: https://1drv.ms/t/s!AtuiwfIBRYFEgbME4SmSecBqpACLww Note however that such an R6 would still be different firmware-wise from the international version.

 

[oliwek2]

You can force the equalizer and/or MSEB to function on all tracks by enabling "Fixed output sampling rate" and setting it to any one of the settings.

It (=MSEB) doesn't seem to work for DSD (what appears to be logic IMHO, DSD is 1bit and very high samplerates, so it's not logic to fix it to even 192K). Or do I miss something ? (maybe DSD mode ?)

edit : it works in PCM as DSD mode (I was in DoP earlier)

 

[394216]

All units purchased through Indiegogo have a functioning Google Play out of the box. If you obtained your unit from the Chinese market it doesn't. But it can be added by following the instructions here: https://1drv.ms/t/s!AtuiwfIBRYFEgbME4SmSecBqpACLww Note however that such an R6 would still be different firmware-wise from the international version.

Hi. For example I bought my R6 from Penon Audio, does this mean that my R6 will be different firmware wise to the international market ones? Or I can just go and flash the the internatinal rom?

 

[oliwek2]

Hi. For example I bought my R6 from Penon Audio, does this mean that my R6 will be different firmware wise to the international market ones? Or I can just go and flash the the internatinal rom?

read here, he already explained this, I'm afraid.... : https://www.head-fi.org/threads/hib...unded-indiegogo.852042/page-163#post-14154148

 

[newtophones07]

I haven't it yet but read about. It has unlocked bootloader and you can install SuperSU via zip-file.

We're did you read about a root method for the R6? Flashing a SuperSU zip requires a TWRP based recovery. Where did you find a link to that?

 

[394216]

read here, he already explained this, I'm afraid.... : https://www.head-fi.org/threads/hib...unded-indiegogo.852042/page-163#post-14154148

Oops my bad. Thanks for this

 

[dzlvs8]

Deleted Link works now that I am home.

 

[oliwek2]

The digital output of the R6 is coaxial digital (i.e. electrical signals not optical). The adapter cable provided in the package would connect the R6 and a device with a full sized RCA coaxial digital input directly but your Hugo 2 has a 3.5mm input. So get an adapter cable with a female RCA end and a male 3.5mm end.

I have a question here : I tried to use the SPDIF (android audio) setting and a 3.5mm TS to 3.5mm TS (mono) cable (something like this : https://www.amazon.com/Hosa-CMM-305-Mono-Interconnect-Cable/dp/B001O5J47U ) to connect my Chord Mojo. I use succesfully the same cable with a Cayin N5 (the original one) that also proposes a 3.5mm SPDIF (coax) connector. But with the R6 I get no sound on the Mojo. Why is that ?
Do I have really to use a female RCA to 3.5mm cable together with the SPDIF adapter from the bundle ?

 

[snbrp]

The best way is use osccilloscope to view signals on output. It's very easy but you need equipment. Or you can use TRRS jack and do research with all 4 poles.

 

[snbrp]

We're did you read about a root method for the R6? Flashing a SuperSU zip requires a TWRP based recovery. Where did you find a link to that?

I read about it on Russian forum.

 

[harpo1]

I have a question here : I tried to use the SPDIF (android audio) setting and a 3.5mm TS to 3.5mm TS (mono) cable (something like this : https://www.amazon.com/Hosa-CMM-305-Mono-Interconnect-Cable/dp/B001O5J47U ) to connect my Chord Mojo. I use succesfully the same cable with a Cayin N5 (the original one) that also proposes a 3.5mm SPDIF (coax) connector. But with the R6 I get no sound on the Mojo. Why is that ?
Do I have really to use a female RCA to 3.5mm cable together with the SPDIF adapter from the bundle ?

I believe the R6 is setup the same way FiiO Daps are. You need a special cable. TSSR to TS.

 

[pewfish]

Hi @Joe Bloggs , I might be stopping by Hong Kong and Shanghai in the summer. Are there any retailers that might stock this in the region and is there a guideline MSRP? Also, how does warranty work when I return to the EU if I were to purchase it from these countries?