[ZiGFi]

Dear friend,

Did you turn off the Bluetooth, Wifi, and the screen is off?

Best regards

Hello, bluetooth and screen were off. Wifi was on but Keep WLAN on during sleep was set to Only when plugged in. The standby drain is very bad on my device and I already have reset it to factory settings. Should I also disable Wi-Fi?

 

[shinewallace]

Dear friend,

Sorry for the late reply. It took some time for the engineer to check your problem. My colleague have provide a new beta app to you via email. Please have a check.

Best regards

Thx a lot, I will try the new version later when off work today.

 

[FiiO]

@FiiO please can you reply to this? I posted it about 9 days ago....thanks kindly...



and this

Dear friend,

We have reported to the engineer about your feedback. They will try to access the feasibility first.

Best regards

 

[FiiO]

Hello, bluetooth and screen were off. Wifi was on but Keep WLAN on during sleep was set to Only when plugged in. The standby drain is very bad on my device and I already have reset it to factory settings. Should I also disable Wi-Fi?

Dear friend,

Would you mind turning off the Wifi and check again?

Best regards

 

[ZiGFi]

Dear friend,

Would you mind turning off the Wifi and check again?

Best regards

Ok, I’ll do that and come back with feedback.

 

[FiiO]

I sent the AAC sample, and the log files, within 24 hours of this request, but haven't heard anything back so I still can't play my AAC files. So just a nudge, because I have a lot of AAC files and it sucks not to be able to play them.

Also, part of the original reason FiiO's request of the log files is because it was taking 40 minutes to rebuild indexes from my SD card on ~25k songs, when other people say it should only take a few minutes. I have tried both sd card slots for the test with no appreciable difference, so it isn't a problem with which card slot I'm using.

Dear friend,

The test.aac file you sent is not standard AAC file so the decoding library could not support it currently, sorry.

Best regards

 

[Mp0wer]

Does the M11 have a bass boost ? I couldn’t find anything but the EQ

 

[kgs51]

All you need is a 3.5mm stereo to RCA cable to connect the FiiO M11 to the Schiit Magni 3. Use the Line Out function on the FiiO M11, and then adjust the volume on the Magni 3 to taste during playback.

Which port do I use on the M11 to plug the 3.5mm end into.

 

[x X x]

Which port do I use on the M11 to plug the 3.5mm end into.

Really man? There are 3 ports, all with different sizes...

With screen turned upwards, from the left: 4,4mm / 2,5mm / 3,5mm.

 

[kgs51]

Really man? There are 3 ports, all with different sizes...

With screen turned upwards, from the left: 4,4mm / 2,5mm / 3,5mm.

I realized this after I looked at the manual. Sorry for the question.

 

[x X x]

I realized this after I looked at the manual. Sorry for the question.

No need to sorry There is only one place when you can fit without loose 3,5 jack

 

[397324]

I've just got my M11, but can't get any sound. I'm using the 3.5mm output and in the audio settings, it's set to PO. Any ideas?

Edit: The 2.5mm output works fine. No way to test the 4.4mm.

 

[jdtenny]

I've just got my M11, but can't get any sound. I'm using the 3.5mm output and in the audio settings, it's set to PO. Any ideas?

Edit: The 2.5mm output works fine. No way to test the 4.4mm.

Suggest you check whatever is on the other (non-M11) end of the 3.5mm cable. Maybe you just need to turn up the volume on that end, or enable input channel selection on the receiving device.

 

[397324]

I've tried other IEM's on the 3.5mm and nothing working. It's not connected to an amp or anything . Just using as a standard DAP.

 

[steamboiled]

I think you need to fix your language support @FiiO. Persian language is not aligned properly

Do i need to re-post just to get this noticed? @FiiO