[kith86]

Is that after doing a full charge? Any indication from the seller if the battery has ever been replaced? To calibrate the battery you can run it to nearly zero and then do a full charge.

Idk, i will ask seller then, but now after 2 times back to 16% it seemed it depleted normally, now it can reached below 5%, should i recharge it or wait until deplete completely?

Updated,

1.now back to 7% after it reached 4% what happpening, so confused here

2. It raised to 8% from 7% after a couple sec

3. Suddenly down to 6%..

 

[jamato8]

Idk, i will ask seller then, but now after 2 times back to 16% it seemed it depleted normally, now it can reached below 5%, should i recharge it or wait until deplete completely?

Updated, now back to 7% after it reached 4% what happpening, so confused here

I would discharge and then do a complete charge. It isn't abnormal for a resting battery to show a little more charge than when checked prior to resting/not using it but I would recalibrate the battery by discharging and then doing a full charge.

 

[kith86]

I would discharge and then do a complete charge. It isn't abnormal for a resting battery to show a little more charge than when checked prior to resting/not using it but I would recalibrate the battery by discharging and then doing a full charge.

Ok i will try, discharge meaning that i should let the battery drop to 0% right? Since batter indicator seemed not right, it cannot be predicted...

 

[jamato8]

Ok i will try, discharge meaning that i should let the battery drop to 0% right? Since batter indicator seemed not right, it cannot be predicted...

When you are totally discharged the unit will not turn on. That is how you will know. If it doesn't start charging plug it into a computer for a low current output charging and it should wake it up and then charge normally.

 

[kith86]

When you are totally discharged the unit will not turn on. That is how you will know. If it doesn't start charging plug it into a computer for a low current output charging and it should wake it up and then charge normally.

Ok, lol, now from 1% it raised to 3%, unit refuse to discharge, i didnot realized this before because i usually recharge battery after reached 20%

 

[kith86]

When you are totally discharged the unit will not turn on. That is how you will know. If it doesn't start charging plug it into a computer for a low current output charging and it should wake it up and then charge normally.

After 0% the unit shutdown but i can still turn it on after couple sec and it showed 1% or 2%, then unit back to shutdown, i must sure first it cannot be turned on right?

 

[ehjie]

After 0% the unit shutdown but i can still turn it on after couple sec and it showed 1% or 2%, then unit back to shutdown, i must sure first it cannot be turned on right?

When charging, turn off the device, you will see an active approximation of how much juice left.
You say u got 1%, the back up indicator will show it, refer to the arrow.
I don't use my device whilst charging.
Leave the device Off until it says fully charge...

 

[ehjie]

This is the Store. I chatted w/ this seller. They're legit.
Unfortunately no 220 battery here...

This Store's responsive...

 

[Skullar]

For anyone looking for dx220 + modded amp8 in EU see below. new battery;
https://www.head-fi.org/threads/for...-fidelizer-ultimate-mod.954462/#post-16163132

 

[Whitigir]

This Store's responsive...

Do let me know how their battery is . Thank you

 

[ehjie]

Do let me know how their battery is . Thank you

Will Do...

 

[ehjie]

Holidays Started. Will be expecting a reply note before the end of month. But a proper response by next month, if they are going to build the batteries...

 

[Whitigir]

It would be lovely if they use batteries as fire crackers for festival lol! Just kidding

 

[ehjie]

It would be lovely if they use batteries as fire crackers for festival lol! Just kidding

I'm a 15 hour flight away from the Mainland, still celebrated the year of the Ox last night locally...

 

[BobJS]

DX228Ex user here. Does anyone here own or have personal experience with either Shanling M8 or Hiby R8? Is either of these a noteworthy upgrade (especially for balanced IEM use)?
M8 vs R8?

I'm asking here because you are my people