I have a question is there a way I can use Bluetooth to control content on the SD card? So far I can create a wifi hotspot to useuglider but my iPad is then unable to use the internet at the same time.
I have a question is there a way I can use Bluetooth to control content on the SD card? So far I can create a wifi hotspot to useuglider but my iPad is then unable to use the internet at the same time.
I was able to use the hybrid mide on the Poly before the release of Gofigure, but not since, which seems strange. Any steps that need to be changed between the two uses?
There's an interesting post on the Hugo 2 thread about the lack of " "full SD control using the GoFigure App". While I certainly enjoy Polymojo as is, for me, full SD playback control over BLE (and no wifi) would be the ideal model for offline SD card listening (ie. I'd have wifi on for Roon Endpoint playback, but only BLE for SD playback).
I wonder if Glider & Chord could work together to come up with a hybrid wifi/BLE solution? I'm guessing BLE control is pretty limited, but perhaps there's a model where Glider could sync it's metadata/artwork database on the phone using wifi (as a one-time-setup whenever SD content is changed), but then send playback control commands from Glider to Poly over BLE?
We are still investigating this but currently we have been unable to repeat it. Poly always appears in Bubble.
Can you or anyone else experiencing this issue confirm to me whether you get the same thing with another DLNA app such as Sesam Music.
Also is your phone/tablet running Bubble on the same WiFi network all running 2.4GHz?
In my home, Poly is usable on a dedicated network Devolo DLAN 500 WIFI.
After i read your post. I start Mojopoly.
Bubble was open in my S8 since yesterday. I see in Bubble that Poly is not there. I turn off and on Bubble and no Poly. Then i restart my S8 and Poly is there. It was not the first time since 1.0.26.
Generaly with 1.0.17, i need to restart BubbleUPnP after i had started Poly.
I was thinking that BubbleUPnP needs this procedure. But i never restarted my S3 or my S8 before.
Edit: i will try Sesame the next time that BubbleUpnp will not see Poly.
Edit2 : I have used Sesame a little and turned off.
After i start BubbleUPnP and select "local player" then i start bluetooth and i select my Poly.
Now for the first time : Bluetooth audio works without interruptions with my S8.
Since i read the procedure friday to update the firmware on the Chord site i was thinking: How can i be sure that my S8 forget the bluetooth parameter of my S8.
So yesterday, i have reseted all the network parameters of my smartphone S8:
WIFI and bluetooth and hotspot.
it could be the origin of my solution.
Maybe this should be written in the Chord procedure.
We are still investigating this but currently we have been unable to repeat it. Poly always appears in Bubble.
Can you or anyone else experiencing this issue confirm to me whether you get the same thing with another DLNA app such as Sesam Music.
Also is your phone/tablet running Bubble on the same WiFi network all running 2.4GHz?
Thanks for responding Matt! Yes both phone and Poly is on the same 2.4GHz network. Only other app I have tried is Hi-Fi Cast and the behaviour of Poly is the same as in BubbleUPnP. I can try Sesam Music also to see if there is any difference.
Name - any
Host - Poly IP (can see in wifi router or in Gofigure) and press OK
4)go to Folders menu in left side
5) right click on music folder - select add to playlist
6) enter play list name
press ok
7)run Gofigure - enjoy!
N.B. on next reboot Poly Refresh DLNA database - P-status -flash "red and blue" -
because Cantata create new playlist in root of SD card. Wait to complite!
Name - any
Host - Poly IP (can see in wifi router or in Gofigure) and press OK
4)go to Folders menu in left side
5) right click on music folder - select add to playlist
6) enter play list name
press ok
7)run Gofigure - enjoy!
N.B. on next reboot Poly Refresh DLNA database - P-status -flash "red and blue" -
because Cantata create new playlist in root of SD card. Wait to complite!
Name - any
Host - Poly IP (can see in wifi router or in Gofigure) and press OK
4)go to Folders menu in left side
5) right click on music folder - select add to playlist
6) enter play list name
press ok
7)run Gofigure - enjoy!
N.B. on next reboot Poly Refresh DLNA database - P-status -flash "red and blue" -
because Cantata create new playlist in root of SD card. Wait to complite!
Just tried this and works great! I did have to delete some duplicates from the list that started with a ._ in from of the track names...
But after deleting those everything works as expected, no problems with hi-res nor DSD files.
It would be even better if the quickplay option could display album art and file type, but then it wouldn't be called quickplay
Instead of typing in the Poly IP address, you can enter. PolyName.local on Mac systems.
For Example, I enter JeremyPoly.local since my Poly name is JeremyPoly
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.