xlr
  1. H

    iFi iDSD nano Black Label 3.5mm balanced to amp with 2x XLR-3

    So I've ordered the iFi iDSD nano Black label for my new setup. And my old amp only accepts 2x XLR-3 ports as balanced input. Also if I'm not mistaken, the iFi iDSD nano BL will sound best with a 3.5mm TRRS jack. But I haven't seen 3.5mm TRRS to 2x XLR-3 anywhere. All I saw was only 3.5mm TRS...
  2. LOXJIE P20

    LOXJIE P20

    Brand Name: LOXJIE Channels: 2 (2.0) Output Power: 665mW Recommended Headphone Maximum Impedance: 501-600 Ohm Output Type: Balanced Out Input Type: LINE IN (AUDIO IN) Dimensions (WxHxD): 148*70*128 mm Body Material: Aluminum Signal To Noise Ratio: 102 Unbalanced headphones Output Power: 32ohm...
    • smallcaps
    • Head Gear item
    • amp balanced hybrid tube xlr
    • Comments: 2
    • Reviews: 3
    • Category: Desktop Amps
  3. YuLong DAART Aquila DAC

    YuLong DAART Aquila DAC

    http://www.yulongaudio.com/pd.jsp?id=39#_pp=106_674 Features: ● Shielded transformer with a unique character of an isolator, which filters out high frequency noises ● Dop64 and Dop128 supported through SPDIF, Optical and AES. ● PCM 24bit 384KHz supported through SPDIF, Optical and...
    • leeperry
    • Head Gear item
    • 384khz aquila balanced daart dac dsd xlr yulong
    • Reviews: 1
    • Category: DACs
  4. Whazzzup

    Audio quest Fire XLR interconnects.

    In preview to my new DX music server I took the opportunity to try out some new cables to interconnect my TT and GSX MK2. I have previously Double Helix Chaperone 3 , a no slouch made to order cable. There was a also a distance issue I had ordered .75 M cable that was tight but worked from DHC...
  5. Audioquest fire xlr

    Audioquest fire xlr

    Picked these up. Very impressed in every way. Packaging, substantial cable, connectors all top quality. The sound impressive nice throat of bass down low, fantastic separation and detail. Here is the blurb. Now I come from double helix Chaperone 3, a no slouch interconnect. Now direct a/b is...
  6. Reggy

    Evaluating Potential Setup, Solid State Pre-Amps, buffers, XLR Cable Length

    Hi everyone, I am in the process of completing my audio chain setup. I've recently purchased a pair of Genelec 8040B studio monitors a few months ago and recently decided to upgrade my basic audio interface to a well regarded DAC. I've purchased the denafrips ARES DAC which is on the way and...
  7. FrequeAudio

    Best 3.5mm converter

    Hello all, I would like to get input/help on purchasing a 3.5mm converter. I just picked up the Sennheiser HD 800s and I have both XLR 4-pin cable and 6.3mm cable. Which would provide the best quality? A XLR to 3.5mm or 6.3mm to 3.5mm? So far, I have only found that the XLR converter is more...
  8. sonicx2218

    Do I need a preamp for my XLR dynamic microphone?

    UPDATE: Solved the problem! Ignore! Can't find where the delete thread button is. Got the AKG D5 mic the other day, and as an XLR noob, have only been met with problems. First it wasn't producing any sound at all - then I got a phantom power device even though it's a dynamic just to see. And...
  9. Fulvio

    Supercheap USB dac to fix crappy University PC audio issue.

    I study interpreting in Italy, and our audio/interpreting system is connected to a crappy desktop with crappy cables soldered by our technician guy (our university can't even afford new cables and purchase planning is not a priority to our professors). While I'm planning to resolder a couple of...
  10. Relic123

    Schiit valhalla 1/modi multibit vs Jotunheim

    I ordered the HD800S, should be here after new year. Now I'm wondering if I should sell my Valhalla 1/modi multibit stack and go buy a jotunheim instead. Jotunheim also got the XLR port, which is something good right? Thoughts on this? Some says the jotunheim is excellent, others says it makes...
  11. S

    Converting stock HD800 cable to Balanced 4-pin XLR?

    Hello. I have a pair of HD800's and had a problem a faulty 1/4" plug. Even though they were slightly past the warranty period, Sennheiser showed off stellar customer support by sending me a brand new cable. I asked where to ship the faulty cable back and they said I didn't have to. So...
  12. keberwein

    Beyerdynamic DT770 "Panzer Mod" Balanced Paint and Pads

    This is a headphone modification for the Beyerdynamic DT770 Pro. The 250 ohm model was used for this mod, but other models should respond well. The mod includes: Balanced re-cable and re-wire. Making the headphones fully balanced, duel entry mini XLR to 4 pin XLR. Internal sound dampening /...
  13. Frank161

    Connecting studio monitors to unbalanced source

    Hi everyone, I am planning on upgrading my current speakers to some studio monitors (probably Focal CMS 40, because of their build and compact form factor) and this will be my setup: Schiit Modi Multibit > Schiit PYST RCA > Schiit Sys > Schiit PYST RCA > Schiit Vali 2 (How do I put the...
  14. S

    DAC/Amp for HD800 with pre-amp volume control

    Hello, Im looking for dac/amp combo for my HD800. Also im gonna get decent studio speakers soon for music listening, probably M-Audio M3-8s. So I was wondering if there are devices, that can make it all in one box, and meet all my requirements. I already found some, but im looking for more...
  15. AndyDandy

    XiangSheng DAC-05A thoughts?

    I'm curious if anyone has any impressions, thoughts or opinions about it. It retails on average for $250. Here are some of its specifications: Single Dimensions: width 330mm, depth 220mm, height 70mm Frequency response: 20Hz-35KHz SNR: general port output: 110dB Harmonic...
    • AndyDandy
    • Thread
    • audio gd audiolab-m-dac balanced dac dac amp balanced dac/amp teac-ud-301-dual-monaural-dsd-usb-da-converter-black xiang-sheng xiang-sheng-dac-01a xlr
    • Replies: 63
    • Forum: Dedicated Source Components
  16. Meetite

    Is it possible to plug in a female 4-pin mini XLR connector into a male 3-pin mini XLR connector?

    Hello all, I am building myself a custom cable which combines a microphone input and headphone output into one cable and want to use 4-pin mini XLR for part of it and to do so I need to be sure that I can plug a female 4-pin mini XLR connector into a male 3-pin mini XLR connector. Does anybody...
  17. AndyDandy

    Is the Audiolab m-dac still relevant in 2017?

    It has the ESS9018 chip, a class A amp and XLR outs. It has won many awards as well. However, this unit is from 2010. Does it have competitors that nowadays outperform it (within the Audiolab m-dac price range)?
Back
Top