tube amp
  1. ampsandsound Suolo Monos

    ampsandsound Suolo Monos

    "The Suolo Monos came about from a brainstorming session. We were looking to keep the tone of the Kenzie which is warm, musical and detailed with the flexibility of the Mogwai SE and its Tonal weight. Additionally we wanted to showcase our technical prowess, as we consider turret boards to be...
  2. xDuoo TA-10 High Fidelity Tube Headphone USB DAC&Amplifier

    xDuoo TA-10 High Fidelity Tube Headphone USB DAC&Amplifier

    A higher-end DAC/amp from community favorite xDuoo, the TA-10 features the flagship AKM AK4490 DAC and a classic 12AU7 tube. Its variety of interfaces make it incredibly versatile and include two sets of auxiliary inputs, a USB input, an SPDIF out, and an RCA out. Fully balanced from input to...
  3. Thenewbie76

    Tube amp for ZMF Aelous?

    Hello everyone, as the title says I am looking for a tube amp to be paired with the ZMF aeolus. I was thinking between the Little dot mk3 or the bottlehead crack. Which would be a better pair for it and make it sound more tubey,warm,open ?
  4. Relic123

    Budget Tube amp for the HD800S?

    Sup folks Got the Jotunheim with the dac-module, not the best pairing with the HD800S I confess. Looking for budget tube amp with a warmer signature, that could reduce some of the sharp highs I'm hearing. I tried the Schiit Valhalla 2, but it's pretty neutral for a tube amp. Needs to be...
  5. Feliks Echo OTL Tube Headphone AMP

    Feliks Echo OTL Tube Headphone AMP

    Enter the world of tube audio filled with warm and hi-class sound. Pure OTL construction. Technical specification - Model 2018 Power tubes 6N6P x 2, driver tubes 6N1P x 2 Frequency response: 15 Hz - 45 Khz +/- 3 dB (300 ohm) Input Impedance: 100 kOhm Power output: 350mW THD: 0.4 % (300 ohm...
  6. E

    Turntable and headphone amp suggestions!

    Hi, I've made a few posts already about headphone amplifier suggestions, but I came across this little hybrid amplifier named the NS-08E. So, I was wondering if this amplifier could be paired with the AT LP-120 to get good sound? Also I'm using the Beyerdynamic DT770 Pro 80 Ohm headphones. Thanks!
  7. zambie

    Balanced output - implications of cable on ?

    Hi All, I've got a slightly peculiar setup that I'm working on building (and it's not a headphone setup, it's a speaker setup at home, so please bear with me). It's for my home speakers. Source > Onkyo DP-X1 DAP Tube Amp > Gemtube BL-02 Spekaers > Martin Logan XT60s Intend to send my music from...
  8. Oriolus BA300S

    Oriolus BA300S

    Product introduction: BA300s uses two micro-tubes to amplify, current-mode operational amplifiers with extended output and 4.4mm balanced input and output. Superior power management ensures the performance of the whole machine. The machine does not set the volume control. The gain of the whole...
  9. xDuoo TA-20

    xDuoo TA-20

  10. Gemtune PA1502A APPJ

    Gemtune PA1502A APPJ

    Tube: 6N4 + 6P6PX2 Input: RCA Jacks Input Impedance: 10K ohms Input Sensitivity: 800mV Output: 6.3mm Jacks Output Impedance: 8 to 600 (Japan Z11-EI48 * 24 Output Transformers) Output voltage: 18Vp-p Frequency Response: 30-30Khz (+ -1db) Input AC Voltage: 100-250V AC Power Consumption: 27W AC...
  11. AthenaZephyrian

    Little Dot I+ tube and op-amp rolling + recommendations given

    Testing was done on Soundmagic HE400i headphones, carefully EQ'd to be roughly linear. I used an HRT Music Streamer Soundmagic II for this test. Tubes: 6JI tubes (one of which burned out after 56 hours): Stiff, dry and congested in the centre-mids, and ran hot in the upper-mids/lower treble...
  12. AthenaZephyrian

    Desperation strikes--ghetto heatsink

    I was fiddling with the gain setting on my Little Dot I+, and it occurred to me that the op-amp was running pretty warm, perhaps warmer than typical for solid states, and that I'd seen people running metal op-amps with heatsinks. I had a plastic-shelled op-amp, which isn't conducive to heat...
  13. AthenaZephyrian

    Very-low-voltage op-amp rolling (for Little Dot 1+)

    I'm figuring out optimal op-amps for my Little Dot I+. It supplies two parallel lines of 3.7v--so 3.7v--to the op-amp. There's less info on many choices rated for such a low voltage than for more typical voltage floors. It seems that running a higher-voltage op-amp--the OPA2107AP for...
  14. AthenaZephyrian

    Op-amp rolling recommendation requests for Little Dot I+

    Hi all. I've heard the stock opamp in the Little Dot 1+ is a bit unrefined--loose in bass, a tad congested, and generally lacking transparency. Thus, I bought an AD823ANZ. But my question is this: I've heard a lot of good things about the 627/637, 2107, and a few others. It would be great if...
  15. Jin Choi

    Looking for a nice tube amp to pair with my new Ether Flows...

    I've been looking at the Pathos Aurium and Woo Audio wa7 as potential buys, but I can't decide which to buy. I would love some input from some experienced listeners. I have listened to the Ether Flows on the Pathos Aurium a few months ago in a department store in Gangnam Korea back before I...
  16. cardeli22

    Most "Tubey sounding HP amp under 500$

    I will be using the tube amp mostly with my Beyers 1990pro. I have looked at the Schiit Lyr 3, Project Ember, and Massdrop CTH. If there are others that might fit the textbook sound of tubeyness please let me know. I realize different tubes have different sonic properties. I guess my question is...
  17. G

    New to tubes is this one busted?

    I received my DarkVoice 336SE today, and it sounds like there is broken glass inside the bottom of the tube, is it busted? Might need to turn volume up to hear it.
  18. Drty LilBits

    APPJ mini2013 6J1+6P1 Tube Amplifier

    Hi all, saw this on sale on Massdrop and was wondering if anyone has any experience with it. I have never owned a tube amp but thought about giving this thing a shot. It's currently going for a hundred bucks. Anyone have any input/opinions to share with this audio noob?
  19. N

    Would the Monoprice USB/DAC be able to power the HE-400i.

    Question is the title. Would it be able to power them or should I get something like the TA-01 and a golden lion tube?
  20. TheBIGKill1998

    Little Dot 1+ Buzzing Problem

    Hello fellow Head-fiers! I recently got a used little dot 1+ ver. 3.0 from ebay. Voshkods tubes were included (of course i use em). Everything is fine and im very happy with its sound, but there is one problem now... there is a very audible buzzing in the background. It is extremely audible...
  21. nichols

    Cavalli Tube Hybrid + SDAC, noise/static issues

    Hey! First post here. Just picked up a CTH+SDAC off Massdrop for use at the office. Noticing a significant amount of faint noise or static. If I hold my hand over the tube it is almost entirely gone. Is this something people just deal with? Are there any recommendations for what to do in this...
  22. O

    Do M1060s sound decent on a tube amp (Little Dot MkII) compared to solid state?

    I'm looking into getting M1060s as my first true hifi experience and I was wondering if they would be significantly hindered by using on a tube amp (Little Dot MkII) and if so, how exactly the sound would change. I've heard planars don't work best on tube, but I found a good combo deal and would...
  23. EnsisTheSlayer

    Little Dot 1+ vs MK2 or other tubes

    Hi everyone! I'm a new and budding audio enthusiast who wants to get into the realm of tubes. I had the chance to audition a cheap (non-audiophile) turntable on my HD558s, and ended up really liking the mellower and non-fatiguing and interesting distorted sound (although I somewhat wish there...
  24. baiyy1986

    The "WOW" Comboooooo

    I purchased my O2 recently for my first "baseline" amp, I should say it is a really amazing amp. But I was still searching for the "perfect" match for my headphone. After several searches online, I locate some of the headphone amps which lots of viewers would think "better" match for the HP. I...
  25. Feliks Audio Espressivo MKII

    Feliks Audio Espressivo MKII

    After several successful years on the market, we decided to refresh our entry level amplifier by optimising its electric circuit matched with upgraded 6N30 power tubes and 6922 drivers. Technical Specification - Model 2018 Input Impedance: 100 kOhm Frequency response: 15 Hz - 45 Khz +/- 3 dB...
Back
Top