Search results for query: *
- Users: Roam
- Order by date
-
A critical review of MHZS Tube CD Players
Nevermind the sound, the build quality and soldering is disgustingly shoddy. There are more bad solder joints than I care to count with blobs of solder all over the place, cold solder joints, and joints without enough solder. $50 DVD players have better solder joint quality than this piece of...- Roam
- Post #12
- Forum: Dedicated Source Components
-
A critical review of MHZS Tube CD Players
Quote: Originally Posted by bluemeteor Have you ever "heard" a MHZS product? And please do not mention the PCM1743KE as this chip, like the other *cheap* Phillips TDA1543 are also very find sounding chips. Yes. I have. It's crap. The soldering and construction quality is crap...- Roam
- Post #6
- Forum: Dedicated Source Components
-
Woo Audio 4 or Single Power Extreme for K701
SinglePower Extreme, on the basis that the Woo 4 uses 12AU7 input tubes. 12AU7s were never designed for linearity and they can't be made to run linearly, they belong in guitar amps and have no place in hi-fi. Even a run of the mill 6SN7 such as the GE 6SN7GTA/B will handily outperform the best...- Roam
- Post #5
- Forum: Headphone Amps (full-size)
-
Output Capacitor configuration question..
Quote: Originally Posted by Ampersand edit: Maybe I should just eliminate the film altogether if I'm using Blackgates. But I was soooo looking forward to a nice big round film cap edit: I did find a 4uF Dynamicap that isn't too large. Could just use that and no electrolytics in...- Roam
- Post #12
- Forum: DIY (Do-It-Yourself) Discussions
-
$5-6k headphone amp suggestions/thoughts
Quote: Originally Posted by recstar24 For that kind of dough I would probably look at getting something custom made. Personally, I would get a DHT 45 Tube amp with the absolute best iron I could afford. Try the Emission Labs AD1, everything you love in a good 45 but with more...- Roam
- Post #33
- Forum: High-end Audio Forum
-
$5-6k headphone amp suggestions/thoughts
Quote: Originally Posted by Uncle Erik If you're going to spend $5k-$6k, get the best. Don't settle for 12AU7 and 12AX7 tubes. Those were originally engineered for inexpensive consumer products - not high-end audio. You want meaty triodes, at least octal tubes. And insist on...- Roam
- Post #32
- Forum: High-end Audio Forum
-
New Rudistor NX-03 (solid state)
Quote: Originally Posted by Kees Why would this not be accurate? And why do you call it a load of crock instead of explaining why this could not be accurate according to you? Johnson noise, also known as thermal noise. It's dependant on bandwidth, resistance, and temperature...- Roam
- Post #13
- Forum: Headphone Amps (full-size)
-
New Rudistor NX-03 (solid state)
-113dB noise floor with a bandwidth of DC to over 100kHz? What a load of crock.- Roam
- Post #8
- Forum: Headphone Amps (full-size)
-
Investing money...CDs, Mutal Funds, etc...any advice?
Quote: Originally Posted by Stephonovich My initial thought is that I might want to buy a house in a year or so, after the market has maybe settled down a little. Not so sure about that anymore. The economy seems shaky at best, and the sub-prime foreclosurers haven't seem to hit CT yet...- Roam
- Post #40
- Forum: Members' Lounge (General Discussion)
-
Have You Tried - Valab Sound Enhancer Input Transformer?
Quote: Originally Posted by braillediver "A transformer will break ground loops which reduces or eliminates hum & noise. Those problems can be resolved for next to nothing without buying that piece of gear. Usually, but not always. Sometimes one can run into a stubborn ground...- Roam
- Post #11
- Forum: Headphone Amps (full-size)
-
Have You Tried - Valab Sound Enhancer Input Transformer?
A transformer will break ground loops which reduces or eliminates hum & noise. Assuming the transformer is of decent quality, this will improve the sound.- Roam
- Post #6
- Forum: Headphone Amps (full-size)
-
R2R vs S-D DAC's
Quote: Originally Posted by gyrodec They are great, assuming you never want to go past 16bits. It become impossible to laser trim the DAC resistors accurately enough, and you end up with very servere destortions creaping in in the low levels under 16bit. Even at 16 bit the non-linearity...- Roam
- Post #17
- Forum: Dedicated Source Components
-
Hi End CD players?
Quote: Originally Posted by 883dave Have a listen to Sim Audio Andromeda For one thing it's a two-box player, and it's also big and heavy. Worth every penny I spent on it though, I find it's better in every respect than my Audio Aero Capitole.- Roam
- Post #10
- Forum: High-end Audio Forum
-
How do you identify unmarked tubes?
Some tubes you can probably identify by their structure, a tube with "mouse ears" is almost certainly a Tung-Sol 6SN7. If you're lucky you should be able to recognize a few tubes this way. With VR tubes it should be pretty straightforward, put together a simple PSU and use an inline resistor...- Roam
- Post #3
- Forum: DIY (Do-It-Yourself) Discussions
-
No-Sound Cable Break-in? Possible?
Find a 60W lightbulb and the socket to go with it, they're readily available at any hardware store. Wire the speaker cables to the socket and adjust the volume until the lightbulb glows nicely. With the right music, you can even watch the bulbs flash in synch with the beat. -
Benefits of a CDP over a decent DAC for ur computer...?
With a CD player, a hardware failure won't wipe out all your music.- Roam
- Post #10
- Forum: Dedicated Source Components
-
Modify your Woo 6. . Sophia and EML 274B . Images pages 32, 33, 34 of int. and ext. and discussion of the SE . . .
Quote: Originally Posted by jamato8 The best thing for the rectifier would be a small cap to a resistor of around 100 ohms and then on to the rest of the circuit. In practice I believe the circuit will and is fine but I agree with Roam that many circuit disregard the specs at the cost...- Roam
- Post #86
- Forum: Headphone Amps (full-size)
-
Modify your Woo 6. . Sophia and EML 274B . Images pages 32, 33, 34 of int. and ext. and discussion of the SE . . .
Quote: Originally Posted by jamato8 Your concern is valid but in practice there aren't many designers who have followed this very closely, so Woo can't be faulted in a way. Cary Audio had 1000uf behind 2 GZ34's in their SLA50 and a good GZ34 would and does last for years in the circuit...- Roam
- Post #80
- Forum: Headphone Amps (full-size)
-
Modify your Woo 6. . Sophia and EML 274B . Images pages 32, 33, 34 of int. and ext. and discussion of the SE . . .
I'd like to direct your attention to the 5AR4 rectifier tube datasheet, which can be found here(PDF file). Note the maximum ratings, specifically the rating for maximum capacity with a condenser input filter. This number is 60uF. In other words, with a capacitor input filter, which is what the...- Roam
- Post #78
- Forum: Headphone Amps (full-size)
-
Tube DAC output stage please comment
Depending on the sensitivity of the amplifier or preamp, active components can be omitted altogether. A simple step-up transformer connected to the output of the 1704 will perform I/V conversion and HF filtering all in one go. However, this is not the best idea if lengthy or highly capacitive...- Roam
- Post #3
- Forum: DIY (Do-It-Yourself) Discussions
-
The Experience Head One - SET Head Amp
I own one, or rather, I will until my daughter's birthday. I've owned & heard more amps than I care to remember and this is one of the very few standouts which I can actually recommend with a clear conscience. The 6S45, also known as the 6C45Pi is very similar to the Western Electric 437A, which...- Roam
- Post #3
- Forum: Headphone Amps (full-size)
-
Why Beautiful Women Marry Less Attractive Men
Quote: Originally Posted by vcoheda i think confidence or being supportive is pretty low on the list, imo. And people wonder why divorce rates are so high these days. That's what happens when people are too ******* stupid to know what's important in a relationship.- Roam
- Post #13
- Forum: Members' Lounge (General Discussion)
-
And so the US of A enters the Great Depression of 2008?
Worst crisis in at least 50 years. That covers everything back to at least 1958. There is nothing between the end of the Great Depression and 1958 which was worse than the stagflation suffered during the 70's and early 80's. Meaning nothing, other than the Great Depression is worse than the...- Roam
- Post #77
- Forum: Members' Lounge (General Discussion)
-
And so the US of A enters the Great Depression of 2008?
When even the likes of Alan "Bubbles" Greenspan say that we're in the worst credit crisis in 50 years, it more or less means "crisis which may rival the Great Depression" when translated from Fed speak. Bloomberg article Excerpt: Quote: Former Federal Reserve Chairman Alan Greenspan...- Roam
- Post #75
- Forum: Members' Lounge (General Discussion)
-
are most of you involved heavily in DIY audio engineers or have pro experience in the industry?
I'm retired now. My degree is in Electrical Engineering and that's where I spent my entire career, focusing on instrumentation and RF design & prototyping. Audio was, and remains a way for me to unwind from the stresses of life, as a bonus I get to apply some of the things I learned from work to...- Roam
- Post #15
- Forum: DIY (Do-It-Yourself) Discussions