Shure SE846 Impressions Thread
Mar 7, 2017 at 10:46 AM Post #17,431 of 22,954
Another good alternative to the Vitamin E capsules is Oto-Ease, which is made for hearing aid users. I'd use the same precautions as suggested above by Quadfather.
 
Terry
 
Mar 7, 2017 at 10:50 AM Post #17,432 of 22,954
Another good alternative to the Vitamin E capsules is Oto-Ease, which is made for hearing aid users. I'd use the same precautions as suggested above by Quadfather
.

Terry


Thank you. I will give that product to try as well.
 
Mar 7, 2017 at 11:47 AM Post #17,434 of 22,954
Mar 7, 2017 at 11:51 AM Post #17,436 of 22,954
  I currently just tried using Vaseline (Petroleum Jelly) and it seems to work as well.

I was worried petroleum may effect the IEM shell.  
 
Mar 7, 2017 at 5:02 PM Post #17,437 of 22,954
Selling my clear 846s soon. PM me if interested.
 
Mar 7, 2017 at 5:15 PM Post #17,438 of 22,954
Mar 7, 2017 at 5:35 PM Post #17,439 of 22,954
Mar 8, 2017 at 3:39 PM Post #17,441 of 22,954
Vega and Alo Reference 8 cable
smily_headphones1.gif

 
Tough to be picky on that choice. The Vega is closer to the 846 signature than the Andromeda, so it might be a smooth swap.
 
Mar 8, 2017 at 3:48 PM Post #17,442 of 22,954
  Try not getting the vitamin E on the IEM shells.  I always wipe my hands on a paper towel after application and wipe the drivers with a dry microfiber cloth after use.  I also use a Dry and Store with dessicant Dry Brik II to keep moisture out of the SE846s.  It is normally used for hearing aids. A soft bristle paint brush can then be used to wipe any debris away.  I only use stock cords, because I found most aftermarket cords fit loosely and stress the femalr MMXC connection.

this might be a little OT from this, but has anyone gotten a little wax on the filters? anything that can be done about that?
 
Mar 9, 2017 at 9:55 AM Post #17,445 of 22,954
Anyone here can share experiences and change in sound with each types of tips and filters?
I am thinking of a neutral sound as much as possible transparent from DAC. So will leave it blue inserts ang nozzles on basic silicon.

I read here that spinfits make a louder bass?


Any comments will be helpful.

Cheerio!
 

Users who are viewing this thread

Back
Top