Have anybody the S10 !
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Shuoer impressions thread
- Thread starter SciOC
- Start date
-
- Tags
- ej07 shuoer shuoer s10 shuoer tape tape
My understanding is that it never made it to public release for whatever reasons. Assuming you asking the 10 drivers per side BA/DD Shuoer S10.Have anybody the S10 !
But yes would be interesting to hear from anyone actually got their hands on one of those. I suspect not that great - otherwise why not release it
Yes I think so, imagine the drivers have to react to electric/analogue signals conducted thru the cables, any variation in conductor inevitably “affects” the sound output.This makes me suspect that cable - unlike most others - has a significant resistance/impedance, changing Tape's electrical input and therefor behaviour.
This is quite interesting in facts. It would be nice to measure the cable's resistance as it might be relatively easy and especially cheap to replicate its effeciency in taming the trebles by simply adding a calibrated impedance adapter on a "normal" cable end, thus removing the need for EQing and making Tape even more convenient
This is esp true for sensitive IEMs, as I found out on my 846, using it on a trial out day all same setup except swapping diff cables: the way it reacts on diff cables, made me believe in this snake oil crap tell by my not sophisticated ears... Although, on the same token, high impedance ones might be less responsive. Like buying earphones, you have to actually try it out yourself before committing large sums of $$$
Last edited:
Ops I totally missed this one, apologies
Hisma
100+ Head-Fier
Thanks for sharing! Had you did any work resolving QC issue then you would have nailed it. Joking aside, great research and play with your Tape. Yes I agree totally your finding, admittedly I didn’t go such depth (as my ear is less sophisticate)...
Just one point I wanted to add, on the snake oil topic - cables. I recently put my EA pure silver single crystal litz on my Tape, oppose initially didn’t as Tape is already “bright/cold” enough, prob better with a copper one but oh my - it got improved so much without noticeable shouty-ness! Obviously, putting a cable costs more than the IEM itself seemed over drive but it was my 846 companion set so no additional cost required... I hope the costs of excellent cables continue come down by the work chi-fi firms put in that all of our IEMs got their deserved signal cables with affordable price. I’m definitely regretting getting my Titan, although its an incredible cable.
Pure silver takes the stage and psycho-acoustics on the EJ07 to another level. It does add a tad bit of harshness in the 3.5khz mid-peak region, but because the EJ07 has rolled-off treble to compensate, it's not egregious in any way and tolerable to my ears. The pros far outweigh the cons. Again I've tried em all... copper, SPC, pure silver. Pure silver all day for me. Though admittedly the only one that sounded objectively worst to my ears was the pure copper. SPC & pure silver sound fairly close & subjective, and will come down to your tolerance for mid peakiness.
Also agree with others that I think it's the material properties of the cable affecting the resistance/OI. In a very metaphorical sense, changing from copper to SPC to silver cables is like adjusting a valve that pipes sound to my ears... with copper the valve sounds half-closed & the pure silver the valve sounds wide open. More-so, I tend not to EQ, but even if I did, I think it would be difficult to make the copper cable sound the same as the pure silver with EQ alone.
Last edited:
redrol
Headphoneus Supremus
Pure silver takes the stage and psycho-acoustics on the EJ07 to another level. It does add a tad bit of harshness in the 3.5khz mid-peak region, but because the EJ07 has rolled-off treble to compensate, it's not egregious in any way and tolerable to my ears. The pros far outweigh the cons. Again I've tried em all... copper, SPC, pure silver. Pure silver all day for me. Though admittedly the only one that sounded objectively worst to my ears was the pure copper. SPC & pure silver sound fairly close & subjective, and will come down to your tolerance for mid peakiness.
Also agree with others that I think it's the material properties of the cable affecting the resistance/OI. In a very metaphorical sense, changing from copper to SPC to silver cables is like adjusting a valve that pipes sound to my ears... with copper the valve sounds half-closed & the pure silver the valve sounds wide open. More-so, I tend not to EQ, but even if I did, I think it would be difficult to make the copper cable sound the same as the pure silver with EQ alone.
Thats funny. I was pretty set on trying a pure silver cable with the EJ. Just for the reasons you outlined. Time to level up! (which cable did you use?)
IEMusic
Headphoneus Supremus
I can’t believe I never compared these graphs before. I have the Mangird on order, but now I’m wondering if I should‘ve just saved up for the EJ07.
RikudouGoku
Member of the Trade: RikuBuds
The Electrostat in the EJ07 should make it sound very different from the tea though.I can’t believe I never compared these graphs before. I have the Mangird on order, but now I’m wondering if I should‘ve just saved up for the EJ07.
Can you still change your order? Personally I’d say try go for ej if you can, as ultimately you will want to upgrade hence spent more in the progress... as we all do :dI can’t believe I never compared these graphs before. I have the Mangird on order, but now I’m wondering if I should‘ve just saved up for the EJ07.
RikudouGoku
Member of the Trade: RikuBuds
I think that waiting for electrostats to be further refined and cheaper is the wiser choice. Not everyone will like these "exotic" drivers so the Tea is the safer choice I believe (and much cheaper).Can you still change your order? Personally I’d say try go for ej if you can, as ultimately you will want to upgrade hence spent more in the progress... as we all do :d
IEMusic
Headphoneus Supremus
Yes, and that’s what I‘m ultimately wanting.The Electrostat in the EJ07 should make it sound very different from the tea though.
I’m locked in on it. It’s okay though, I think I’ll really like the tuning. Plus then I can take my time and see how all the new tribrids are.Can you still change your order? Personally I’d say try go for ej if you can, as ultimately you will want to upgrade hence spent more in the progress... as we all do :d
redrol
Headphoneus Supremus
I do think the EST drivers have a different presentation vs BA. I like them MUCH more if tuned right.
Yep mostly agree, although, the EST currently being implemented are really only from Sonion and that won’t allow major price drop anytime soon unless someone in China manage to develop their own IP version. I think someone said he got his ST7 for around $500, this is as low as I’ve seen. But of course, the sound differences surely can’t be measured and justified by the price differenceI think that waiting for electrostats to be further refined and cheaper is the wiser choice. Not everyone will like these "exotic" drivers so the Tea is the safer choice I believe (and much cheaper).
RikudouGoku
Member of the Trade: RikuBuds
Yes I also seen the st7 at around 550 during sales (although not recently though...).Yep mostly agree, although, the EST currently being implemented are really only from Sonion and that won’t allow major price drop anytime soon unless someone in China manage to develop their own IP version. I think someone said he got his ST7 for around $500, this is as low as I’ve seen. But of course, the sound differences surely can’t be measured and justified by the price difference
Maybe hope for some "bellsing" est lol.
Users who are viewing this thread
Total: 4 (members: 0, guests: 4)