You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Show us your Head-Fi station at it's current state. No old pictures please...
- Thread starter HiFiGuy528
- Start date
1 connect to the streamer /Dac, another 1 connect to the power strip.@samr33 which components are you using the Entreqs with?
shwnwllms
1000+ Head-Fier
Cayin sure got that right.
Last edited:
Pharmaboy
Headphoneus Supremus
Did you make that dark grey wooden rack? I see high-grade furniture plywood there (lovely to work with).New Vygarde arrived today
shwnwllms
1000+ Head-Fier
Did you make that dark grey wooden rack? I see high-grade furniture plywood there (lovely to work with).
I did not make it, but its made from fault-free birch (13 layer furniture grade strength) with a charcoal stain. Standard studio rack. Mine is 10U, with 8” hairpin legs. I added real rails as well for some cable management and some ventilated shelving to maximize airflow.
Studio rack was a custom job from Etsy. (They also do heritage series (hardwoods & dovetails) but they can get pricey. The carpenter Louis is out of Brooklyn and is a pleasure to work with if you need something custom built. Zero VOC finishes as well so no off gassing. It’s built like a tank. (Furman is flush mounted at the bottom)
https://www.etsy.com/listing/819708227/studio-rack-hairpin-legs-free
Pharmaboy
Headphoneus Supremus
I used a lot of Baltic birch in my day. This 13-layer plywood is the only plywood I know of that looks terrific with the cut edges shown & stained.I did not make it, but its made from fault-free birch (13 layer furniture grade strength) with a charcoal stain. Standard studio rack. Mine is 10U, with 8” hairpin legs. I added real rails as well for some cable management and some ventilated shelving to maximize airflow.
Studio rack was a custom job from Etsy. (They also do heritage series (hardwoods & dovetails) but they can get pricey. The carpenter Louis is out of Brooklyn and is a pleasure to work with if you need something custom built. Zero VOC finishes as well so no off gassing. It’s built like a tank. (Furman is flush mounted at the bottom)
https://www.etsy.com/listing/819708227/studio-rack-hairpin-legs-free
Never saw charcoal stain before. It's an interesting look!
shwnwllms
1000+ Head-Fier
I used a lot of Baltic birch in my day. This 13-layer plywood is the only plywood I know of that looks terrific with the cut edges shown & stained.
Never saw charcoal stain before. It's an interesting look!
I’ve got a BDI console on another floor with that same charcoal finish. It’s a nice look and can look either gray or brown depending on lighting (and surrounding furnishings). The other hardwood nearby the studio rack is all ebony so it works well. I didn’t have the Pendant in mind when it was built but the walnut burl looks nice sitting on top of it IMO
This made me miss my LCD-5 a bit for some reasonNew Vygarde arrived today
shwnwllms
1000+ Head-Fier
This made me miss my LCD-5 a bit for some reason
Why did you sell them?
Simply moved on to other flavors and a system that's better and easier without EQ. They are still one of my favorite headphones and top 5 sound quality to my ears.Why did you sell them?
jonathan c
Headphoneus Supremus
… return of the prodigaL amP …
[tubes are Tungsram ‘red print’ E88CCs]
The Chinese need to be banned from using Comic Sans though.
Cayin sure got that right.
Don't get it and don't care.
Last edited: