ilikepooters
500+ Head-Fier
Had a play about with the headphones, the holes in the foam were cut unevenly so tidied them up, both are now near perfect like the picture below, does nothing for sound but looks alot better.
Also i raised the pads so my ears were't touching the flat part, improved comfort no end, this is how far they came out.
I also looked inside the cups, the cabling in the left side was touching the wood cups causing slight buzzing/vibration type noise, so folded those away best i could and put back together.
I didn't use tissue to stuff the pads, i had some old RJ11 ethernet cable lying around so made it into ring shapes and taped the ends together, then put those under the pads.
In all is more comfy and sounds slightly more refined, everyone should try it
Also i raised the pads so my ears were't touching the flat part, improved comfort no end, this is how far they came out.
I also looked inside the cups, the cabling in the left side was touching the wood cups causing slight buzzing/vibration type noise, so folded those away best i could and put back together.
I didn't use tissue to stuff the pads, i had some old RJ11 ethernet cable lying around so made it into ring shapes and taped the ends together, then put those under the pads.
In all is more comfy and sounds slightly more refined, everyone should try it