[PiSkyHiFi]

I have Earstudio ES100 and have a pair of Bluetooth Sony H900N which can also be used with a wire(3.5mm) I turn off bluetooth on the Sony h900n then use via wire with Earstudio which gives me better sound and volume. However I read this of the Sony website "The headset supports high resolution audio playback when connecting via the supplied headphone cable and turned on." .Will using my Sony H900n with bluetooth on and connected via cable to Earstudio Es100 and via bluetooth to Samsung note 8 damage anything ?

As long as you follow the guidelines about plugging and unplugging only when silent, no problems.

 

[Lurk650]

It gives you Hi Res bc the DAC is being run when on. If you don't have it on and it's connected to the ES100 you are getting HiRes from the ES100 lol

 

[posnera]

As long as you follow the guidelines about plugging and unplugging only when silent, no problems.

Can anyone explain how unplugging while music is playing could possibly harm the device?

 

[PiSkyHiFi]

Can anyone explain how unplugging while music is playing could possibly harm the device?

I think it's to do with the dual drive nature or something, signal present and being crossed over the ground when unplugging briefly may short the amplifier somehow, not exactly sure, but not willing to try it either.

 

[CactusPete23]

FYI: Here is some Info on a next firmware update and App update from Radsone:

"Radsone is still following the every posting in the ES100 thread.

The next F/W and app update would be coming soon.

- max. volume limit option
- occasional fails on auto pairing (especially when multi-pairing)
- Added USB 44.1KHz --> supporting both 44.1KHz/48KHz (16-bit)
- Added USB 48KHz/24-bit (Optional, but only with macOS....)

The optional 48KHz/24bit USB would only be available with macOS.
We tried many F/W tweak to avoid the HW limitation of ES100 USB,
but found that those F/W tweak works with macOS only.

Also, the F/W update roadmap would be:

- 10-band PEQ support
- ES100 Button mapping option
- Auto reconnect when charger connected (optional)
When you leave ES100 with your phone while charing ES100 at the desk, the connecting would be lost,
and when you get back, ES100 would reconnect to your phone automatically.
Currently, 3 minute after connection loss, ES100 would be off."

 

[PiSkyHiFi]

FYI: Here is some Info on a next firmware update and App update from Radsone:

"Radsone is still following the every posting in the ES100 thread.

The next F/W and app update would be coming soon.

- max. volume limit option
- occasional fails on auto pairing (especially when multi-pairing)
- Added USB 44.1KHz --> supporting both 44.1KHz/48KHz (16-bit)
- Added USB 48KHz/24-bit (Optional, but only with macOS....)

The optional 48KHz/24bit USB would only be available with macOS.
We tried many F/W tweak to avoid the HW limitation of ES100 USB,
but found that those F/W tweak works with macOS only.

Also, the F/W update roadmap would be:

- 10-band PEQ support
- ES100 Button mapping option
- Auto reconnect when charger connected (optional)
When you leave ES100 with your phone while charing ES100 at the desk, the connecting would be lost,
and when you get back, ES100 would reconnect to your phone automatically.
Currently, 3 minute after connection loss, ES100 would be off."

Awesone!

 

[Luap123]

Radsome!

 

[Matarro]

I've noticed an issue when my ES100 is paired with two phones at once. I usually listen to music from my private phone (Huawei Mate 10 pro) and have it paired with my work phone (Samsung Galaxy S5) to be able to take calls. As soon as I do anything on my work phone the sound stops for a few seconds and then resumes again. Especially annoying when listening to podcasts or audio books, every time I so much as touch my work phone I miss stuff and have to go back.

 

[499916]

Will Android users be able to get usb 24bit I wonder? I can only hope, and bummer about Mac support only

 

[499916]

Just a few of my wishes:
- Presets for combined settings
- Bass Booster
- Differentiate the amp shaping more with a neutral setting as default
- Battery saving mode
- Color scheme options
- widgets

And it is a wonderful product. Will give my amazon review soon.

 

[PiSkyHiFi]

I've noticed an issue when my ES100 is paired with two phones at once. I usually listen to music from my private phone (Huawei Mate 10 pro) and have it paired with my work phone (Samsung Galaxy S5) to be able to take calls. As soon as I do anything on my work phone the sound stops for a few seconds and then resumes again. Especially annoying when listening to podcasts or audio books, every time I so much as touch my work phone I miss stuff and have to go back.

Is it notifications?

 

[crabdog]

As if the ES100 isn't awesome enough already, Radsone continues to improve it. These guys are rockstars!

 

[waynes world]

FYI: Here is some Info on a next firmware update and App update from Radsone:

"Radsone is still following the every posting in the ES100 thread.

The next F/W and app update would be coming soon.

- max. volume limit option
- occasional fails on auto pairing (especially when multi-pairing)
- Added USB 44.1KHz --> supporting both 44.1KHz/48KHz (16-bit)
- Added USB 48KHz/24-bit (Optional, but only with macOS....)

The optional 48KHz/24bit USB would only be available with macOS.
We tried many F/W tweak to avoid the HW limitation of ES100 USB,
but found that those F/W tweak works with macOS only.

Also, the F/W update roadmap would be:

- 10-band PEQ support
- ES100 Button mapping option
- Auto reconnect when charger connected (optional)
When you leave ES100 with your phone while charing ES100 at the desk, the connecting would be lost,
and when you get back, ES100 would reconnect to your phone automatically.
Currently, 3 minute after connection loss, ES100 would be off."

Thanks for posting that. These bits are going to be especially useful for me

- Added USB 44.1KHz --> supporting both 44.1KHz/48KHz (16-bit)
- ES100 Button mapping option

@wslee, thank you once again!

 

[Soaa-]

FYI: Here is some Info on a next firmware update and App update from Radsone:
- 10-band PEQ support

AAAAAAAAAAAAAAAAAAAH!!

Gotta give it to Radsone for making what is already a killer device even better!

With this I'll be able to notch out peaks in some of my IEMs... ahemMD+ahem

 

[meinname123]

@wslee you are still allowed to post here - no need to read only.

Only a few posts were against the rules and were removed.
At least this has been stated by an Administrator here: Post #1735