smeggy
Member of the Trade: ThunderpantsTP1
- Joined
- Feb 9, 2004
- Posts
- 6,299
- Likes
- 29
Ah, don't wanna do that then
Originally Posted by Bleuburd /img/forum/go_quote.gif Ok, when I plug in the headphones, the tubes get way less bright. I'm thinking that's why I'm hearing little to no sound. Even with the pot maxed out. I rewired the pot, so that isn't it. Can someone please help me!?!? |
Originally Posted by Swingtops /img/forum/go_quote.gif n_maher Here are some pics http://img2.imageshack.us/img2/4138/dscf1889.jpg http://img2.imageshack.us/img2/2120/dscf1890.jpg http://img2.imageshack.us/img2/6045/dscf1891.jpg http://img2.imageshack.us/img2/8100/dscf1892.jpg I tried to get the best angles I could but most of the resistors are buried |
Originally Posted by Swingtops /img/forum/go_quote.gif tomb Thanks for taking a look at it for me - the case is actually plastic, so I am not too concerned about shorts on the back side of the perf board but the splice I will take care of. I began looking over the schematic again and I think I have some serious problems ( perhaps wiring at 4:30 am is not recommended ) one of the .1 uF caps is not even hooked to anything. I also started to put the amp in DIY layout creator and it turned out to be a big CF so I think I might just start over with a new layout that I have thought about for a bit thanks again |
Originally Posted by Bleuburd /img/forum/go_quote.gif Ok, it's not the mosfets and it's not the pot. I fixed some wiring that I fouled up, and now I still have the same problem. I can't hear anything. When the pot is turned all the way up, then I can hear something faint, but it isn't at all listenable. Here are pics as requested. Sorry, they aren't very good, and I didn't really know how to get good shots of the inside. By the way, I housed it in a cigar box. Smokey student hybrid? |
Originally Posted by Bleuburd /img/forum/go_quote.gif Sure, bigger pics in the next hour. |