Starfinder
Head-Fier
I can confirm that bridging the 2 pin end of the right channel cable then plugging the cable in, then replace the iem back onto the 2 pin does indeed trigger high impedance mode on the v20. I was able to get x10 100k resistors on eBay delivered for 1 pound. Hope someone here finds this idea useful.I read to trick the V20 into high impedance mode a +50ohms resistor is required on the right channel... ...on a 3.5mm to 2pin cable, you might only need to use tiny resistor itself, just bridge the pins on the right channel when inserting the cable, then plug in the iem/headphones in
Last edited: