Latest Thread Images

DIY Earbuds
Mar 24, 2019 at 3:31 PM Post #811 of 4,749
hungphi93 said:
Does anyone try to build with driver Yuin PK1 in here https://www.aliexpress.com/item/ori...earhook-earphones-disassemble/2034991204.html
The seller said that it is the disassembled drivers, so that means the sounds like the original Yuin PK1 right?
Thank you!
Click to expand...

I've purchased a set of the same drives, but from DIY Earphone Tribe Store.
They're in my earbuds parts bin, and I haven't installed them in any shells, yet.
If the shells you put them in have the same tuning holes & dampening material as the original PK1 earbuds, then yours should sound pretty much the same.
 
Mar 25, 2019 at 9:06 AM Post #813 of 4,749
Yesterday was time to finally MMCX my Snow Lotus 1.0 :smile_phones:

SL_box.jpg

SL1.0_MMCX.jpg
 
Mar 25, 2019 at 1:43 PM Post #814 of 4,749
DBaldock9 said:
I've purchased a set of the same drives, but from DIY Earphone Tribe Store.
They're in my earbuds parts bin, and I haven't installed them in any shells, yet.
If the shells you put them in have the same tuning holes & dampening material as the original PK1 earbuds, then yours should sound pretty much the same.
Click to expand...
Thank you for the suggestion.
Do you mean dampening for #1 or dampening for #2 (tuning holes)? I think for tuning holes is easy to find instead of #1. I've been built PK2 before with different kind of #1 materials, the dense type will give more bass :)
BXIza3k.png

c93emTz.png



HungryPanda said:
They are pretty good drivers, I have made a couple of pairs with them
Click to expand...
Thank you so much! I've been ordered one pair and I still waiting for them :)
 
Mar 25, 2019 at 9:29 PM Post #815 of 4,749
Mar 25, 2019 at 9:37 PM Post #816 of 4,749
hungphi93 said:
Thank you for the suggestion.
Do you mean dampening for #1 or dampening for #2 (tuning holes)? I think for tuning holes is easy to find instead of #1. I've been built PK2 before with different kind of #1 materials, the dense type will give more bass :)
BXIza3k.png

c93emTz.png




Thank you so much! I've been ordered one pair and I still waiting for them :)
Click to expand...

Well, both the driver dampening, and the shell dampening, should affect the sound of the earbuds.
 
Mar 26, 2019 at 6:56 AM Post #818 of 4,749
Mar 26, 2019 at 8:13 PM Post #820 of 4,749
Mar 26, 2019 at 8:57 PM Post #821 of 4,749
Mar 26, 2019 at 9:46 PM Post #822 of 4,749
HungryPanda said:
Unfortunately I have no 3D printer did put a couple of these in my cart for sale day

https://www.aliexpress.com/item/DIY...eadphones-shell-casing-15-4mm/2033165338.html
Click to expand...

While I don't have a printer myself, there's a local CreatorSpace / Maker Group, that has 3D Printers - http://creatorspace.org/
The local county library also has 3D Printers - http://www.hcpl.net/content/3d-printing
For either one, I'd probably have to install some open source CAD / Design Software on my PC.

Might be worth it, to check and see whether there's a Maker Group that's local to you.
Or, check with Monoprice, to see about buying one of their inexpensive 3D Printers - https://www.monoprice.com/search/in...D Printers mand Accessories&TotalProducts=313
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 5 (members: 0, guests: 5)
Back
Top