You are most welcome, just let me know what length cable you would like to build and if you will be using a three or four wire braid. If you decide to go with the Rean four pin mini xlrs I talked about, you can get them from Markertek and I posted links earlier.
I'm not sure if one of these images have been made or not yet, but here is the pinout for the 4.4mm balanced plug. This is based on the Kimber Kable 4.4mm balanced cable straight from Sony.
I'm not sure if one of these images have been made or not yet, but here is the pinout for the 4.4mm balanced plug. This is based on the Kimber Kable 4.4mm balanced cable straight from Sony.
I'm not sure if one of these images have been made or not yet, but here is the pinout for the 4.4mm balanced plug. This is based on the Kimber Kable 4.4mm balanced cable straight from Sony.
Nice looking cable. A good quality Neutrik connector obviously. Once you take it down to a TRS there is a common ground so I wonder then if such a cable would be considered balanced to unbalanced? The way the neutriks lock on the cable is really top notch, you never have to worry about the cable coming loose as you might with a small clamp on some connectors.
Not being a engineer but I would pick A or B as it doesn't put things together but that could be totally wrong . I don't think on a short cable it will make much of a difference.
I guess Kimber does it up to split in A) way. By the looks of of their web pictures of the cable. They use two colors for each ground and signal wires.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.