TrollDragon
Headphoneus Supremus
You have to Cryo those as well or buy some Dueland's. PCx has them on sale from $595 each down to $189 each, screaming deal if you ask me.
You have to Cryo those as well or buy some Dueland's. PCx has them on sale from $595 each down to $189 each, screaming deal if you ask me.
EDIT: After searching for cables i always end up to the Mogami W2534. Is it a bad choice because of the money or it will affect the sound? The resistance seems pretty low, doesn't it?
Well if you connect 3 of the conductors and the shield to the shells, The end-to-end resistance is 2.56 Ohms per 1000 feet. An extremely good coax end-to-end resistance is 1.7 Ohms. So if you hook it up that way it's not bad.
I guess it will be better than the 2-euros-RCA i use now, right?
Yes of course. Mogami is a good cable brand. They're like the Neutrik of cables (ie. the standard of cables). They're very easy to work with and are relatively cheap.
What will be the RCA plug that you're going to solder the cable to? Because that's also important and make sure that the diameter of the RCA plug hole is large enough to accept the 6mm in diameter of the Mogami cable.
I was thinking to buy some Neutrik (gunmetal) 6.5mm, from ebay, but they are pretty expensive. I just knew that Neutrik has nice plugs, so i chose the best good looking(for me) rca plug. Do they worth it?
Can anyone recommend a nice looking Y splitter for headohones for making your own cable?
Noone seems to answer my questions
I am really not sure what dia I am new to diy just wanted to see what was out there
How much expensive? All I know is that Neutrik makes very affordable connectors. They have some expensive ones but they rarely go past €50.
Here for example: Neutrik NYS 373 for only 1.90€ a plug in which you need to buy 4 so that means 7.60€ and will gladly accept up to 8mm cables.
If you don't want fancy and just want inexpensive, functional and reliable with solid build quality connectors, Neutrik is very good.