[darren700]

sounds like the exact same problem im having. computer acts like 192k is playing, is detected in windows, but nothing on my W4S DAC1 which does support 192k over Coax. No sound at all and no sample rate detected. Im gonna try new cable (using Monoprice Coax Now).
I have a Wireworld Starlight 6 and Wireworld Ultraviolet USB on the way which im hoping will solve the problem.

 

[Kingwa]

Got back from Tenor :
 
2012/7/31-------Before this date we will offer the new driver expect improve performance and fix most problems.
2012/8/1~2013/1/31-- Fully improve and fix all problems, support the new operate systems (Maybe they are mean the Win8 and Linux) .

 

[clsidxxl]

Hello Kingwa,excuse me but, did you talk about the problem of dpc time - latency driver  http://www.head-fi.org/t/500369/audio-gd-digital-interface/3120#post_8507996
Thanks

 

[Kingwa]

As I know from they sent the future plan to me, they will fix the blue screen case , improved the CPU load rate, ect .
And will support other new OS and Linux .
As I know most software and driver must have time to make it perfect through users feedback .
I still hold on Tenor chip  , because I consider its sound better than another one well know chip which is we have test them start same time .

 

[clsidxxl]

Thanks Kingwa,the high cpu load rate is related with the high dpc time.We look forward to take advantage of the Tenor chip.

 

[mtntrance]

Just added a DI-DSP with upgraded TXCO clocks to my rig (NFB-8>Phoenix>LCD-2 rev.2).  Couldn't be happier.  The up sampling improvement from Redbook is significant.  Improved sound stage with more distinction with mids/highs without being fatiguing.  

 

[ursdiego]

Quote:

sounds like the exact same problem im having. computer acts like 192k is playing, is detected in windows, but nothing on my W4S DAC1 which does support 192k over Coax. No sound at all and no sample rate detected. Im gonna try new cable (using Monoprice Coax Now).
I have a Wireworld Starlight 6 and Wireworld Ultraviolet USB on the way which im hoping will solve the problem.

That's interesting. What does Kingwa say? Maybe there is still an unknown flaw at the DI. My DAC does not support 192K over coax s/pdif. so I can't test that. It should however work over I2S. Cable can't be the issue, as I tested it with a no-cable-in-between-solution. I will see if I can get a DAC for testing, that supports 192K over coax s/pdif.

 

[ursdiego]

Quote:

Just added a DI-DSP with upgraded TXCO clocks to my rig (NFB-8>Phoenix>LCD-2 rev.2).  Couldn't be happier.  The up sampling improvement from Redbook is significant.  Improved sound stage with more distinction with mids/highs without being fatiguing.  

I agree, it sound great. However, I am limited to 96khz upsampling for the moment, as for an unknown reason, I cannot get 192khz to sound. Have you tested upsampling to 192khz? What is the DAC you are using?

 

[somestranger26]

Quote:

snip snip
 
My DI with lithium battery

 
BNC to BNC adaptor

Several weeks ago, some members were using adapters to connect the DI direct to their DACs. I tried this shenanigans with my DI-V2-S and I'm finding it sounds at least as good as my Black Cat Veloce cable, so it may be worthwhile for those of you looking for new tweaks.

 

[ursdiego]

Quote:

Several weeks ago, some members were using adapters to connect the DI direct to their DACs. I tried this shenanigans with my DI-V2-S and I'm finding it sounds at least as good as my Black Cat Veloce cable, so it may be worthwhile for those of you looking for new tweaks.

For suitable DACs a direct connection by I2S gives great results too. Just be careful connecting and not moving around the equipment when connected.

 
This is inside of the DI-DSP. There is a jumper too (not visible at this image) that has to be set to I2S output.

 
This is inside my DAC Reference 9 with USB. It is below the DSP-module. These are the cable originally connected to the USB-input-module. They are the I2S input. I think, many Reference-DACs of audio-gd look similar. Beware to connect the right cables! LRCK on the DAC connects to WCK on the DI-DSP. 3.3V is of course not connected.

 

 
I juste leave the DI top-down, on top of the DAC

 

[kr0gg]

did you try playing 192khz by i2s?
 
by the way the i2s jumper should be set on the farthest position if looking from DI's face? at least i2s works for me with that setting.

 

[Kingwa]

Tenor had sent the new driver to me for  test.
For the best issue, I have install my computer with the WIN7 64 bit.
Up to now there is  stably working even I done anythings on it .
Half of my mates had bought the TE8802 gears, I had ask them test every night and give me the records.
Hopefully Tenor will release the new driver within this month as they promised.

 

[clsidxxl]

Kingwa,thanks for this good news,the high cpu time is now ok?I will test this driver for you if you want 

 

[hawkhead]

Please can you make this test driver available

 

[kr0gg]

yes, it would be nice if we could test the new driver too.