camillem
Head-Fier
- Joined
- Apr 6, 2017
- Posts
- 52
- Likes
- 24
You need to turn it on after plugging it....
I had
You need to turn it on after plugging it....
I'm honestly thinking about selling most of my stuff and getting a used 2C...
I remember trying that out last week and then played that Atmos Amaze video. I honestly didn't notice a difference. This was with the 3D effect on.I also want to ask anyone that knows, should we turn on Dolby atmos or Windows 7.1 under spatial settings with the mobius? Or does the mobius just run it's own virtual software so there's no point?
I also want to ask anyone that knows, should we turn on Dolby atmos or Windows 7.1 under spatial settings with the mobius? Or does the mobius just run it's own virtual software so there's no point?
How can I use my Mobius with my TV and receive the 5.1 signal? All the receivers I can see are 3.5mm (2 ch) to BlueTooth transmitters.
Windows 8.1, geforce 1060 (till the RTX comes) Bluetooth device Shanling M0 LDAC HQ Headset arrived Monday Sep 17th. I've put a total of 24 hours of use into the headset so far (timed).
-NOTE TO READERS- I'm 'cursed' to run into strange bugs; The Mobius is an amazing headset, straight performer with clarity and unmatched features and allows you hours of use without fatigue. There are bound to be early issues. Take the bugs I've run into with a grain of salt. They are fixable. This is the best PC gaming headset out there I've run into so far. I like it better than astros, steelseries, and beyerdynamic. Sound with music and bluetooth-LDAC are amazing, 3d, 2channel doesn't matter flat, default and music are very hard to tell the difference on the EQ but I can tell there IS a difference. I'm not really going to go into this as other people have covered how it sounds and honestly have more experience in that area (and more headsets ). I am going to focus on a few PC gaming impressions and issues with both the headset features and the software.
- BUG - Headset : paired Bluetooth LDACHQ : When coming from PC to Bluetooth (Unplug headset from USB, THEN turn on Bluetooth device receive pairing notice on headset) sometimes after auto-pairing the 3d button will -not- function. No pressing of the button in any length or variation will make this feature active [no voice or 3d effects occur]. When this happens, the only solution I've found is to turn the headset off wait 20 seconds, If you turn it back on too quickly will leave you without the 3d button working again. After proper off/on 3d features are enabled and no more issues occur. I've run into this several times, I have not tried other features like EQ or channel modes when this has happened.
- BUG - Software : Changing volume anywhere in windows causes the HRTF Personalization head display to 'glitch' out crazy. Kinda looks like Max Hedroom in the glitching. Can be repeated using the Mobius volume wheel.
.
Stay updated on Audeze at their sponsor profile on Head-Fi.
|
Great to hear. Loving the sound of the Mobius. Gorgeous.Thank you for the detailed feedback. We hope to address most of them in future.
Thank you for the detailed feedback. We hope to address most of them in future. Quickly though, two of them. The BT options are set by the phone and not by Mobius. You have to limit the BT datarate from the phone to have headtracking work.
Here is some more info on how to do this.
https://audeze.zendesk.com/hc/en-us/sections/360001114971-Bluetooth-Connection
The Head glitch is a bug only in s/w. When info is being sent to the headphone, the flow of information from headphone to host is interrupted. The S/W is unable to handle this at the moment. We will get this fixed.
@Audeze
I have experienced this bug as well...
"BUG - Headset : paired Bluetooth LDACHQ : When coming from PC to Bluetooth (Unplug headset from USB, THEN turn on Bluetooth device receive pairing notice on headset) sometimes after auto-pairing the 3d button will -not- function. No pressing of the button in any length or variation will make this feature active [no voice or 3d effects occur]. When this happens, the only solution I've found is to turn the headset off wait 20 seconds, If you turn it back on too quickly will leave you without the 3d button working again. After proper off/on 3d features are enabled and no more issues occur. I've run into this several times, I have not tried other features like EQ or channel modes when this has happened."
Except in my case I was using my phone in 2ch Hi-Res. I unplugged my USB and the Headset resumed the song via Bluetooth LDAC. When I tried to use the controls to change settings, none of them worked. In order to switch settings I had to plug the phine back in, turn off 2ch Hi-Res back to 7.1 and then unplug. The headset was then able to switch to blutooth with working 3D and Headtracking.
I think this is because 2ch HiRes disables everything and when it was unplugged, those features were still disabled.