That would have been brilliant, a true balanced amp with balanced input...
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Walnut Hi-Fi V2 WAV (& MP3) Player by wt - :ok_hand: screenless budget killer combo DAP/Amp :ok_hand:
- Thread starter vapman
- Start date
Anyone getting the F1 planning to mod the input to accept balance input?
I wonder if they could just make it balance input with an adapter to do se.
That would have been brilliant, a true balanced amp with balanced input...
Highly doubt a interconnect cable that terminates at 2.5mm balanced at both end exist................. well at least I had never seen one before..............
Well I'm sure has seen one somewhere. Anyway, it's not like hard to do one by yourselfHighly doubt a interconnect cable that terminates at 2.5mm balanced at both end exist................. well at least I had never seen one before..............
silverfishla
Headphoneus Supremus
I don't think that will work.Anyone getting the F1 planning to mod the input to accept balance input?
I wonder if they could just make it balance input with an adapter to do se.
DBaldock9
Headphoneus Supremus
Anyone getting the F1 planning to mod the input to accept balance input?
I wonder if they could just make it balance input with an adapter to do se.
That would require re-engineering the input stage of the amplifier, to "float" the L(-) & R(-) signals, since they're currently both connected to the common GND of the F1 - and they would be separate on the Balanced output of the source device.
Once the circuit etches are modified for the input wiring, you'd need to find and install a 4-pole volume control, in-place of the 2-pole unit.
You would then have to modify the circuitry around the Op-Amp socket, so that you can install a differential output device, in-place of the single-ended Op-Amp that's currently in the circuit.
The gain structure of the Balanced vs Un-Balanced input stage may also need to be modified.
Ynot1
500+ Head-Fier
This kind of reminds me of the time they soldered the opamp.
Which do you prefer se input or balance input?
Which do you prefer se input or balance input?
at Walnut F1 amp's price point, its target customers are probably "commoners" like myself, curious about balanced drive, but doesnt have the finance to dive into a balanced DAP or balanced drive amp. and so us "commoners" prefer SE input and Balanced drive output in the F1 to get our feet wet =PThis kind of reminds me of the time they soldered the opamp.
Which do you prefer se input or balance input?
Last edited:
Ynot1
500+ Head-Fier
Someone is hacking on my ipad. It feels like they are bufferring my keystrokes to get a head start on what Iam about to say.
I heard facebook monitors keystrokes before you even enter the message.
Anyway I saw Penon selling a 3.5 to 2.5 trrs adapter so if the input is balance I think it shouldn't matter.
Though a se to balance adapter probably is something else altogether.
But a balance input should accept se converted to balance. It just might cost more.
I heard facebook monitors keystrokes before you even enter the message.
Anyway I saw Penon selling a 3.5 to 2.5 trrs adapter so if the input is balance I think it shouldn't matter.
Though a se to balance adapter probably is something else altogether.
But a balance input should accept se converted to balance. It just might cost more.
Last edited:
DBaldock9
Headphoneus Supremus
Someone is hacking on my ipad. It feels like they are bufferring my keystrokes to get a head start on what Iam about to say.
I heard facebook monitors keystrokes before you even enter the message.
Anyway I saw Penon selling a 3.5 to 2.5 trrs adapter so if the input is balance I think it shouldn't matter.
Though a se to balance adapter probably is something else altogether.
But a balance input should accept se converted to balance. It just might cost more.
The F1 has a Single-Ended Input, driving an OPA2134 dual Op-Amp, which can be swapped, like the ones in the Walnut v2 and Zishan Z1.
From looking at the photos of the amp, it looks like the Op-Amp then drives a pair of TI Burr Brown DRV134PA single-ended to balanced drivers [ http://www.ti.com/product/DRV134 ].
The issue with trying to connect a Balanced source to the Single-Ended input of the F1 - is that balanced outputs are four separate signals (L+),(L-),(R+),(R-).
Since the (L-) & (R-) signals can't be shorted together, without damaging the output amps in the Source, they have to be kept separate.
So, while you can drive balanced loads with a single-ended output - you can't (easily) drive a single-ended load with a balanced output.
Ynot1
500+ Head-Fier
You win. F1 is se input.
But I hope the future for balance input will still be alive with the F series.
But I hope the future for balance input will still be alive with the F series.
Gregjh
New Head-Fier
Can someone tell me if the Walnut V2 can use a 2.5 tttrs jack?
Sorry if this is a dumb or nonsensical question, I'm new to this audio tech stuff.
Sorry if this is a dumb or nonsensical question, I'm new to this audio tech stuff.
DBaldock9
Headphoneus Supremus
Can someone tell me if the Walnut V2 can use a 2.5 tttrs jack?
Sorry if this is a dumb or nonsensical question, I'm new to this audio tech stuff.
The Audio Input and Output of the Walnut V2 is Single-Ended 3.5mm TRS.
You can connect a 3.5mm TRS Plug -to- 2.5mm TRRS Jack Adapter, which will allow you to listen to Balanced Earphones from the Single-Ended output.
But, you can't connect a Balanced (TRRS) source to the Single-Ended (TRS) input, without shorting the (L-) & (R-) signals to GND.
Gregjh
New Head-Fier
Thank you, I'll just get the standard edition VE Monk SPC to listen to it, thenThe Audio Input and Output of the Walnut V2 is Single-Ended 3.5mm TRS.
You can connect a 3.5mm TRS Plug -to- 2.5mm TRRS Jack Adapter, which will allow you to listen to Balanced Earphones from the Single-Ended output.
But, you can't connect a Balanced (TRRS) source to the Single-Ended (TRS) input, without shorting the (L-) & (R-) signals to GND.
MuZo2
Headphoneus Supremus
- Joined
- Nov 16, 2011
- Posts
- 2,823
- Likes
- 413
Power out comparison between V2 and F1?
i think the real question is:Power out comparison between V2 and F1?
who ordered an F1 and has anyone that ordered received theirs yet?
Users who are viewing this thread
Total: 5 (members: 0, guests: 5)