[Jason36]

Successfully upgraded to 2.01 FW via iRiver Plus4 software and it all seems to be working fine at the moment. Both 64GB SD Cards scanned and all music found and working. Nice to have the upgraded GUI of the 120

 

[sjt1]

Quote:

Thank you kind sir, this is great read!
 
May I know what vol do you usually set when connecting to Corda Quickstep?

My pleasure!
 
I usually set volume on the AK to 70 (just below max), and set the gain switch on the front of the QS to high. With my headphones, I set the volume on the quickstep to about 45% (this is about 11 o clock looking at the front of the amp) and this gives comfortable volume. Obviously it will depend on the headphones you are using!
 
I did find that if I set the AK's vol to the max of 75, I was getting distortion (not just with the QS but with other amps as well), so I backed it off to 70 and so far no problems with the sound. I am really liking the AK / QS combination.

 

[spkrs01]

Waiting for the AK100S ......amps

 

 
Still a few friends to join the group

 

[lescanadiens]

Ooohhhh.....myyyyyyyyy!!!!

Waiting for the AK100S ......amps




Still a few friends to join the group

 

[akhyar]

Sweeeeeet!!

 

[Metalboy]

Iam wating on my rwak100-s too. But I only have the Glacier ;/.

 

[Gintaras]

Quote:

Waiting for the AK100S ......amps

 

 
Still a few friends to join the group

 
you ruined my day...... now i turned all green with envy.

happy listen and pls report back, will be interesting shootout, just do not forget 

 
btw, how your wife tolerates you? 

 

[spkrs01]

Quote:

 
you ruined my day...... now i turned all green with envy.

happy listen and pls report back, will be interesting shootout, just do not forget 

 
btw, how your wife tolerates you? 

 
Let's just say that I know more about Hermes, LV and Chanel than FitEar....

 

[edlauck]

Quote:

It cant scan if it doesnt mount the cards- which it doesnt. The scan ends with 0 files processed.
I reverted to listrid and now i can see my music again.. That's a fact.

Are you using the firmware downloaded from www.iriver.com?  I used this one and my AK100 cannot recognize two 64GB cards too.  However, I tried the firmware downloaded from www.iriver.jp (i.e., Japanese site) and installed it into my AK100 again.  Now the machine can recognize all cards!!  You can try this.

 

[kkcc]

Quote:

Waiting for the AK100S ......amps

 

 
Still a few friends to join the group

 
 
Man you will soon run out of totl portable gears to buy at this rate......  LOL!  

 

[Petru]

New 2.01 solved my problem of wrong interpretation utf8 and utf16 russian tags in flac files.

 

[jurnaza]

Quote:

Are you using the firmware downloaded from www.iriver.com?  I used this one and my AK100 cannot recognize two 64GB cards too.  However, I tried the firmware downloaded from www.iriver.jp (i.e., Japanese site) and installed it into my AK100 again.  Now the machine can recognize all cards!!  You can try this.

This worked for me as well. With the US firmware version of 2.01 my 64GB cards were not recognized. Installed the Japan version of 2.01 and both cards are recognized.  I had previously been stuck on 1.32 as I had the same issue with 1.33 US firmware as well.
 
Thanks for the tip!!!

 

[sonickarma]

Sorry for this lazy post but  I don't have time to currently read the 6086 posts (i will in future).
 
I have the AK100 and don't know if I should upgrade to Offical (Jp) Firmware 2.01 or Listrid 2.0
 
I do have 64gb sd also.
 
Sorry I'm a little lazy but would like to upgrade this evening.
 
Thanks for your help

 

[kkcc]

Quote:

This worked for me as well. With the US firmware version of 2.01 my 64GB cards were not recognized. Installed the Japan version of 2.01 and both cards are recognized.  I had previously been stuck on 1.32 as I had the same issue with 1.33 US firmware as well.
 
Thanks for the tip!!!

 
Does that means the firmware posted on different country sites are different!?  

  This is quite strange!

 

[wladrus]

Quote:

 
Does that means the firmware posted on different country sites are different!?  

  This is quite strange!

 
Firmware is the same everywhere
We have this topic discussed earlier with Listrid.These are some features of the "core". Listrid-3.0 (in the future

) he will try to do this instead of Iriver