GREQ
Headphoneus Supremus
Hifiman HE-6 - Original 4-Screw Version
The Headphone Driver Pics Thread
- Thread starter tyre
- Start date
GREQ
Headphoneus Supremus
Philips N 6301 (driver is glued in place)
ZMF Verite Open. There are alot of Verite pics but I could not find any where you could see most of the magnet. So here it is.
Last edited:
- Joined
- Mar 20, 2013
- Posts
- 16,646
- Likes
- 12,459
ZMF Verite Open. There are alot of Verite pics but I could not find any where you could see most of the magnet. So here it is.
I like these grills a lot, even though they're not something that's visible during use
frank2908
100+ Head-Fier
- Joined
- May 6, 2009
- Posts
- 374
- Likes
- 156
So those vent on the baffle are completely open?ZMF Verite Open. There are alot of Verite pics but I could not find any where you could see most of the magnet. So here it is.
frank2908
100+ Head-Fier
- Joined
- May 6, 2009
- Posts
- 374
- Likes
- 156
How is the cup damping? Wondering where does the holographic soundstage comes from
Baffle holes are open. The cups have a cork ring and some fabric.
On the outside fabric has a different pattern so there might be more than one layer.
On the outside fabric has a different pattern so there might be more than one layer.
Take a peek inside Altiat CAL.1H's rear end
dakanao
Headphoneus Supremus
- Joined
- Jun 8, 2012
- Posts
- 3,110
- Likes
- 440
To me, it seems like the damping paper behind the vents under the diaphragm serves 3 purposes: 1: reduction of midbass to lower midrange, 2: Having a quick cheap fix for the backwaves resonance of the diaphragm and 3: getting more subbass extension by lowering the midbass through lower mids and tighter bass due to reducing airflow.
What you also get however if all the holes are sealed up, is a more edgy, resonant sound vs puncturing holes in it
What you also get however if all the holes are sealed up, is a more edgy, resonant sound vs puncturing holes in it
GREQ
Headphoneus Supremus
Sennheiser HD600 (early production)
GREQ
Headphoneus Supremus
Razer BlackShark V2 X
(4/10 OK tuning, but quite poor resolution)
Razer Kraken V3 X
(this headphone is a dumpster fire)
I never understand why they use such thin wiring in headphones.Razer BlackShark V2 X
(4/10 OK tuning, but quite poor resolution)
Razer Kraken V3 X
(this headphone is a dumpster fire)
It looks to be 32awg wires.
GREQ
Headphoneus Supremus
gimmeheadroom
Headphoneus Supremus
I still think Sennheiser wins for the thinnest wires aka cat whiskers of all time.
Users who are viewing this thread
