[AUDIOBREEDER]

will trrs to 4.4mm still come out balanced on the ZX2?

 

[nc8000]

will trrs to 4.4mm still come out balanced on the ZX2?

ZX2 does not support 4.4 and ZX2 is seperate ground not balanced but you will get seperate ground from ZX2 with a 3.5 trrs male to 4.4 trrrs female if that is what you mean

 

[Richter Di]

Could one of you confirm that this is how the TRRS is wired with the ZX2:
Sleeve: R-
Ring 2: L-
Ring 1: R+
Tip:       L+

Many thanks!

 

[nc8000]

Could one of you confirm that this is how the TRRS is wired with the ZX2:
Sleeve: R-
Ring 2: L-
Ring 1: R+
Tip:       L+

Many thanks!

And the 4.4

 

[Richter Di]

And the 4.4

Hi, thanks for the quick answer, but you lost me.
I know the Sony picture, but this does not say if ring 3 or ring 4 are R- or L-.
And the 4.4 I did not understand at all. Does the ZX2 also accept this? If yes, I must have missed it.
Anyhow, I bought 5 TRRS plugs and asked a friend to change them for me. So I realy need to make sure if this is correct:

Sleeve: R-
Ring 2: L-
Ring 1: R+
Tip: L+

Many thanks!

 

[gerelmx1986]

 

And the 4.4

Hi, thanks for the quick answer, but you lost me.
I know the Sony picture, but this does not say if ring 3 or ring 4 are R- or L-.
And the 4.4 I did not understand at all. Does the ZX2 also accept this? If yes, I must have missed it.
Anyhow, I bought 5 TRRS plugs and asked a friend to change them for me. So I realy need to make sure if this is correct:

Sleeve: R-
Ring 2: L-
Ring 1: R+
Tip: L+

Many thanks!

He said already ZX2 does not do 4.4

 

[Richter Di]

He said already ZX2 does not do 4.4

Where?

Is there not possibly an easy yes or no to my question?

 

[nc8000]

Where?

Is there not possibly an easy yes or no to my question?

5 posts back. 4.4 is only for the new WM1 players. I can't answer your question about wich ground goes where as I don't know

 

[ttt123]

Hi, thanks for the quick answer, but you lost me.
I know the Sony picture, but this does not say if ring 3 or ring 4 are R- or L-.
And the 4.4 I did not understand at all. Does the ZX2 also accept this? If yes, I must have missed it.
Anyhow, I bought 5 TRRS plugs and asked a friend to change them for me. So I realy need to make sure if this is correct:

Sleeve: R-
Ring 2: L-
Ring 1: R+
Tip: L+

Many thanks!

The ZX2 TRRS is the same as the HifiMan HM-801, and the re-zero Balanced Plug below.
 
 
Note: The cable's foil or braided shield must NOT be connected to anything at the TRRS plug end of the cable.
 

 
 

 

[nc8000]

I knew I had seen those diagrams before but could not find them

 

[chancee]

Can you still stream Tidal on the ZX2?  I'm thinking of getting one but I read somewhere that the android version was so old that Tidal wouldn't work anymore.  Is that true?  If it isn't true, does it seem like something that could happen in the next year or so?  I wouldn't want to shell out $1200 only to not be able to download from Tidal in a year.  Thanks!

 

[ccklone]

Hey Now,

I stream Tidal everyday at work on my ZX2.

--
Finest kind,
Chris

 

[nc8000]

Can you still stream Tidal on the ZX2?  I'm thinking of getting one but I read somewhere that the android version was so old that Tidal wouldn't work anymore.  Is that true?  If it isn't true, does it seem like something that could happen in the next year or so?  I wouldn't want to shell out $1200 only to not be able to download from Tidal in a year.  Thanks!

It works fine now but I think it is a real concern that it might stop working at some point but nobody can tell you for sure

 

[Gosod]

This player is good for me, but I still use my Zx1.

 

[Richter Di]

  Can you still stream Tidal on the ZX2?  I'm thinking of getting one but I read somewhere that the android version was so old that Tidal wouldn't work anymore.  Is that true?  If it isn't true, does it seem like something that could happen in the next year or so?  I wouldn't want to shell out $1200 only to not be able to download from Tidal in a year.  Thanks!

Yes, no problem. Qobuz unfortunately crashes too often.