MudEnjoyer
100+ Head-Fier
After reading the connector issues that frequently pop out in this thread, I will use the stock cable until it literally rots.
That is also what i do. They are way to precious for me to not have them around me anymore.After reading the connector issues that frequently pop out in this thread, I will use the stock cable until it literally rots.
The stock cable is really good but I prefer the Dunu Blanche. Mostly because of the swappable tips but also prefer the sound though the difference is relatively small. Used the stock 4.4 the first 3 years and now the Dunu for about 2 years so have essentially only fitted a cable twice in 5 years and removed it onceAfter reading the connector issues that frequently pop out in this thread, I will use the stock cable until it literally rots.
The recent conversation about connectors and aftermarket cables got me curious and I decided to check on my Z1R’s a little closer, I noticed that my left side the cable has a little more play, it swings easier than the right side. Now I’m wondering if this is going to affect it on the long run for now both sides are working perfectly with no issues. I have a feeling that eventually the left side will need to be repaired.
Yeah I would say it’s about the same for me, the left side spins easier Than the right one hopefully it won’t affect the operation of the IEM, I’ll probably just avoid playing with the cables too much just to be safeThe TAZH1ES is nice but by dac/amp standards it's "older" and technology keeps advancing, is there any desktop dac/amp combo that competes or surpasses it with similar sound for less money? And synergies well with my z1r?
One of my sides spins a bit easier, I'd say both pretty much take as much force to turn them as turning a 3.5mm cable jack
Yeah when I change the cables in the future, hope the weak link is the cable and not the connector on the IEM itself.Yeah I would say it’s about the same for me, the left side spins easier Than the right one hopefully it won’t affect the operation of the IEM, I’ll probably just avoid playing with the cables too much just to be safe
I believe our friend psikey used the Z1R with the A306 before he sold it to stick with the M9 , send him a PM and ask him I’m sure he won’t mind giving you his views on it.Can anyone say if the Z1R can be driven sufficiently by the Japanese (uncapped) version of the NW-A306? And what this synergy is like?
Thanks, will do.I believe our friend psikey used the Z1R with the A306 before he sold it to stick with the M9 , send him a PM and ask him I’m sure he won’t mind giving you his views on it.
The bsep is available in both z1r and ie900 i think but I believe you can get request for any of the brise offerings to be terminated for z1r.is the brise sep for z1r the "only one" you can get from brise exclusively made for the z1r? no 8w ultimate from another category?
My left side spons also easier than the right, in my Z5 is the oppositeYeah I would say it’s about the same for me, the left side spins easier Than the right one hopefully it won’t affect the operation of the IEM, I’ll probably just avoid playing with the cables too much just to be safe