[littlenezt]

Can you two please tell me which firmware is running on UP5 and what iOS version on iphones? Will have a check on this.


Yeah, it's super annoying setting, it was reported to engineers and should be changed with firmware update.

is there any way to recalibrate the battery low beeping notification/warning? seems to be too premature / too early for me, my unit when the beeping start it last around 2hours before the unit actually turned itself off

 

[Shanling]

is there any way to recalibrate the battery low beeping notification/warning? seems to be too premature / too early for me, my unit when the beeping start it last around 2hours before the unit actually turned itself off

No way how end user could do that.

 

[littlenezt]

No way how end user could do that.

i guess the only solution is to wait for firmware update then

 

[YanaMJ]

is there any way to recalibrate the battery low beeping notification/warning? seems to be too premature / too early for me, my unit when the beeping start it last around 2hours before the unit actually turned itself off

Mine does not bip and turn off at around 10%

 

[Hanesu]

Can you two please tell me which firmware is running on UP5 and what iOS version on iphones? Will have a check on this.

Both, firmware of the UP5 and iOS are the newest versions (at least I think so): 1.6.0 and 14.7.1

By the way, I have asked this before, but where exactly (menu & button) can I upgrade the firmware in the app? Under "Bluetooth device control" I can only find a yellowish window that shows the current firmware version, but there is no button that says "upgrade firmware" etc? Or will it pop up when there is an upgrade?

 

[Shanling]

Both, firmware of the UP5 and iOS are the newest versions (at least I think so): 1.6.0 and 14.7.1

By the way, I have asked this before, but where exactly (menu & button) can I upgrade the firmware in the app? Under "Bluetooth device control" I can only find a yellowish window that shows the current firmware version, but there is no button that says "upgrade firmware" etc? Or will it pop up when there is an upgrade?

Open Bluetooth Device Control from side menu and there you click on the arrow, that checks for new firmware.

 

[Hanesu]

Open Bluetooth Device Control from side menu and there you click on the arrow, that checks for new firmware.

Ok, thanks! Just mine doesn’t have that arrow (see picture)! But it will come up when there is an update available?

 

[hardpike]

I don't have a bip...the device just turn off

Me too!!!

 

[littlenezt]

welp, mine is beeping constantly for every 30s for around 2hours before the device turned off

 

[EIOIO]

My device is still using atpx even if I connect it with a usb c cable .
Why is this?

 

[EIOIO]

My device is still using atpx even if I connect it with a usb c cable .
Why is this?

my bad .The cable wasn't plugged completely

 

[jsmiller58]

my bad .The cable wasn't plugged completely

Call center: Hello, this is tech support. How can I help you?

Caller: My device isn’t working. What’s wrong with it?

Call center: OK, let’s try to figure out what’s going on. First, is it plugged in?

Call center: Hello? Hello?



Thanks for the laugh - I needed it!

 

[Johnfg465vd]

My Tab does not have 3.5mm out and Since I sold my BC3 I'm looking for a bluetooth receiver, how does UP5 sound when compared to Qudelix 5K?

Looking at the posts so far the software side of things seem to be lacking/in development, range when compared to 5k is also shorter. If there isn't a big difference in sound I'll just wait for iFi Blu GO to be available.

 

[biostik]

My Tab does not have 3.5mm out and Since I sold my BC3 I'm looking for a bluetooth receiver, how does UP5 sound when compared to Qudelix 5K?

Looking at the posts so far the software side of things seem to be lacking/in development, range when compared to 5k is also shorter. If there isn't a big difference in sound I'll just wait for iFi Blu GO to be available.

I'm too considering the UP5 or the IFi Go. Can't wait for some reviews/ comparisons.

 

[Hanesu]

Ok, thanks! Just mine doesn’t have that arrow (see picture)! But it will come up when there is an update available?

@ Shanling: Any idea concerning this issue (the arrow button for firmware upgrade is not being displayed): Is this a software bug or will it appear automatically when an update is available?