Ableza
Headphoneus Supremus
Alas no.
It's not that simple.
Masturbation helps prostate health, or so I read in "Men's Health" magazine...
Alas no.
It's not that simple.
Oh yes it does.Masturbation helps prostate health, or so I read in "Men's Health" magazine...
Looking for a free quality player for other OS you can have a look at Quad LibetYes it was Music Bee. Alas I am MacOS and Linux and it's windows only....
It's the wrong tool for the job. You should be using a simple RCA switchbox with no potentiometer in the signal path. Even with volume control at max, it might not be providing a straight-through connection.For the last 2.5 years I have been using SYS in reverse as a glorified switch to go between headphone amp and speaker amp.
...
I checked my SYS just now and the volume was maxed.
It's the wrong tool for the job. You should be using a simple RCA switchbox with no potentiometer in the signal path. Even with volume control at max, it might not be providing a straight-through connection.
For example:
https://vetco.net/products/2-way-stereo-audio-rca-switch-box
http://www.mcmelectronics.com/product/50-6175
Many more choices on eBay and Amazon.
I have recently been recently researching this, and found these higher end switchboxes. I saw the ones you linked, but thought these would be more "on par" with the rest of my equipment.
http://www.decware.com/newsite/ZSB.html
http://www.goldpt.com/sw4.html
http://www.homehifi.co.uk/S/tc-7240.htm
I am seriously considering the ZSB
Here is one that is a good bit cheaper. A switch doesn't really need to be all that "High End". It's made for switching sub millivolt phono signals so line level is a breeze. I had to clean the switches on mine after about 5 years. Was using it for two turntables, now use it to switch between AVR pre-out and Saga to my 2 channel speaker amp
http://www.esotericsound.com/elect.htm#d_Switchbox
Here is one that is a good bit cheaper. A switch doesn't really need to be all that "High End". It's made for switching sub millivolt phono signals so line level is a breeze. I had to clean the switches on mine after about 5 years. Was using it for two turntables, now use it to switch between AVR pre-out and Saga to my 2 channel speaker amp
http://www.esotericsound.com/elect.htm#d_Switchbox
IMO spending over $300 for a passive mechanical switchbox is outrageous.
If you have know how to solder, the other thing you could do is open up your SYS and add a couple of short jumper wires to bypass the potentiometer, on the underside of the board:
Thanks, I guess the main reason I wanted to go "higher end" than that, is I have a Niles AXP-1 Switchbox, which by all accounts is a well reviewed switchbox in that price range, and after a few years it started crackling, and now multiple inputs have marked signal drop. It just kind of soured me on products of that ilk.