Personally, I think the DT770 Pro is very different compared to the DT990 Pro. DT990 Pro has a wider soundstage, more bass impact, less bass rumble, more treble flooding compared to DT770 Pro. In short, DT990 sounds cleaner, clearer, and wider compared to DT770 Pro.
Given the right equipments, the difference would be noticeable. If you are just outputting from something like an E6, the difference is less noticeable as the amp can't produce a clean sound by itself.
But neither of those headphones is balanced in my opinions. Both have greater emphasis on bass and treble, which means their midrange suffers in the process. That's what people call the V-shape sound signature.
Oh, and I wouldn't recommend using them with a Fiio E6. It works, but it wouldn't be able to bring out their best.
I guess ur right, but the Fiio E6 is all i can afford. I'm 16 and don't have a full time job so i don't earn much money. Which cans under $200 would you recommend that would work well with the E6 and have lots of bass (better then average) and still maintain overall balance.
I guess ur right, but the Fiio E6 is all i can afford. I'm 16 and don't have a full time job so i don't earn much money. Which cans under $200 would you recommend that would work well with the E6 and have lots of bass (better then average) and still maintain overall balance.
Shure 840's or ATH M50's are the closest to your description - they're reasonably well balanced in their sound signatures,
and have bass that's more than enough for most people. If you want more bass, I'd say you're tending towards "basshead"
territory. (There are headphones for that, of course, but if you start with those you can throw "overall balance" out the window._
You could try the Fischer Audio FA-011s. They're about 150USD and they sound absolutely amazing for that price. They're excellent for most genres, and they're quite comfortable.
Try noisymotel.com or frogbeats.com. They're handmade in Russia, so they can be a tad difficult to find. Good luck on your quest, they're wonderful headphones ^^
It turns out that you should be able to get sufficient volume out of a 250 ohm DT 990 with just an E6. See here.
The actual drivers on the DT 7/8/9 series are different for each level of resistance, so get the highest impedance version you can and enjoy it now. You'll get at least equivalent sound and much better comfort now and better scalability once you step up to something like the Fiio E10 or new Audinst HUD Mini.
Out of the 3 headphones I tried on that list with your sources, I would have to go: Sennheiser HD 25-1 II > Beyerdynamic DT 770 Pro (80 ohm version) > Beyerdynamic DT 990 Pro. If I had a desktop amp I would go: Beyerdynamic DT 990 Pro > Beyerdynamic DT 770 Pro > Sennheiser HD 25-1 II. I believe the best would be the Sennheiser HD-25 II for your source requirements based on what I've tried on that list, being that it's the easiest to drive of the 3.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.