[drubrew]

I'm hoping the cable makers can add resistors to all 3 bass, mid and treble for custom tuning.

We will have most likely 4 versions. With and without the Attenuation Pod. Without is for the Pro market particularly bands. They don't like the pod as it get in the way. 2 resistor versions for the Roxanne. 1 to tune like JH13 and the other to tune like the JH16. And maybe a separate resistor version for the Layla and Angie. The Black Dragon will be available late spring and the Silver Dragon this summer. 

 

[adammax]

The 2 resistors are like the current stock cable?

I was thinking 3 separate resistors to adjust bass mid and treble separately. Currently, we can only adjust the bass.

 

[drubrew]

The 2 resistors are like the current stock cable?

I was thinking 3 separate resistors to adjust bass mid and treble separately. Currently, we can only adjust the bass.You missed 

What I mean by resistors is no Attenuation Pod but fixed resistors in the connector to tune the sound based on the frequency curves similar to the JH13 or JH16. We will use higher grade resistors that sound better than an Attenuation Pods. For those who want a purity approach. JH removes these resistor values form the crossover in the IEM in place of the Attenuation Pod. We would add them back in but in the cable. Does that make sense? We wont be doing adjustments on all the drivers individually as that would make for a very large pod on the cable.

 

[Edric Li]

  What I mean by resistors is no Attenuation Pod but fixed resistors in the connector to tune the sound based on the frequency curves similar to the JH13 or JH16. We will use higher grade resistors that sound better than an Attenuation Pods. For those who want a purity approach. JH removes these resistor values form the crossover in the IEM in place of the Attenuation Pod. We would add them back in but in the cable. Does that make sense? We wont be doing adjustments on all the drivers individually as that would make for a very large pod on the cable.

 
So basically, one for bass boost and one for treble boost? 

 
I've been waiting for the Dragons since I got my Roxanne and finally, they are coming!
 
And do you mind explain a little more on the separate resistor version? 

 

[drubrew]

   
So basically, one for bass boost and one for treble boost? 

 
I've been waiting for the Dragons since I got my Roxanne and finally, they are coming!
 
And do you mind explain a little more on the separate resistor version? 

No only Bass. The way the Roxanne/Layla/Angie are configured is that the crossover work for the mids and highs are taken care of in the IEM. The Attenuation Pod takes care of the Low End. Thus we cant manipulate the mids and highs without removing the crossover components from the internals of the IEM. Well that cant be done. So only bass manipulation can be done.

 

[onlychild]

Will there still be some sort of pod attached to the cable to house the resistors for choosing the JH13 or JH16 curves or will there be two separate cables, one with the 13 curve and other with the 16 curve?
 
thx

 

[drubrew]

They will be fixed resistors in the 3.5mm or 2.5mm molded connector. There will be no pod.

 

[adammax]

4 versions.
1)Resistor that tune to match JH13.
2)Resistor that tune to match JH16
3)An Attenuation Pod
4)??????
 
Wonder what's the 4th combination. All the custom cables are pure silver?
 
Will you be able to share the sound of Attenuation Pod with Roxanne?

 

[Edric Li]

-

 

[drubrew]

4th version Without Pod is for the Pro market, particularly bands. They don't like the pod as it get in the way with their Wireless pack/cable routing. JH puts the full crossover in the IEMs for Bands.
 
Black Dragon will be a 16% silver over copper 8 conductor cable. Silver Dragon will be a UPOCC silver 8 conductor cable. Cant give feedback yet on sound as we are still tooling up all the plastic injection molds for all the connectors and pods etc. 

 

[onlychild]

Hey Drew, how thick will the black dragon cable be?  About same thickness as stock Roxanne cable or more?  Specifically interested in the one with the resistor to match the JH16s.  

 

[drubrew]

  Hey Drew, how thick will the black dragon cable be?  About same thickness as stock Roxanne cable or more?  Specifically interested in the one with the resistor to match the JH16s.  

It will be a close to to the JH however instead of the Braided Tinsel wire it will be a solid jacket style cable. So the conductors wont untwisted.

 

[onlychild]

Excellent, the solid jacket style is the reason I like Moon Audio cables so much.  Makes it look way more professional.  

 

[KimChee]

I think I'm gonna get the Lunashops cable..I'll let you guys know how it is...

 

[zniper2984]

I think I'm gonna get the Lunashops cable..I'll let you guys know how it is...

Please do share your impression .