n_maher
Resistorous Conflagorous
- Joined
- Nov 20, 2004
- Posts
- 8,411
- Likes
- 35
Quote:
Just a word of warning, I've never successfully pulled a pin from a heatsink. I've tried, not all that hard, but it seemed like it would be a recipe for bad things to happen.
Someone should have a closer look at 707-411626B25 from Mouser, I don't see any pins and I think that this part would be sufficient. Actually, 707-411621B25 might be fine as well.
Originally Posted by tomb /img/forum/go_quote.gif On the other hand - if you look at Nate's pics, he used screws. Unfortunately, I think we're stuck with pulling the pins out if you go that route. I didn't see any "no pin" options for the size heat sinks we need at Mouser or DigiKey. |
Just a word of warning, I've never successfully pulled a pin from a heatsink. I've tried, not all that hard, but it seemed like it would be a recipe for bad things to happen.
Someone should have a closer look at 707-411626B25 from Mouser, I don't see any pins and I think that this part would be sufficient. Actually, 707-411621B25 might be fine as well.