Could you please test the USB DAC functionality - whether there's any delay in the sound when watching videos...? Thank you!Just ordered one of these and will be happy to provide an A/B comparison with the WM1A when it arrives if anyone's interested.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Lotoo Paw 6000 (2019)
Sure, no prob.Could you please test the USB DAC functionality - whether there's any delay in the sound when watching videos...? Thank you!
powersfineart
Head-Fier
Could you please test the USB DAC functionality - whether there's any delay in the sound when watching videos...? Thank you!
I watched a couple 30 minute Netflix videos using Firefox and didn’t notice any discernible latency. I was using a 10 year old PC running Windows 10 with only USB 2.0 ports. Your mileage may vary. I couldn’t get my Arch Linux laptop to recognize the LP6K though.
Awesome! Thanks!I watched a couple 30 minute Netflix videos using Firefox and didn’t notice any discernible latency. I was using a 10 year old PC running Windows 10 with only USB 2.0 ports. Your mileage may vary. I couldn’t get my Arch Linux laptop to recognize the LP6K though.
Can someone tell me what the filters are on the PMEQ? In particular, is there a peak/dip filter?
Audiosolace
Head-Fier
Cong
A bit over your budget, but have you tried Tia Trio ? Makes a great pair with the PAW 6000
tks everyone, also looking for a iem around USD 1500 to replace my close to dead ie800s, any recommendations?
A bit over your budget, but have you tried Tia Trio ? Makes a great pair with the PAW 6000
powersfineart
Head-Fier
Can someone tell me what the filters are on the PMEQ? In particular, is there a peak/dip filter?
The only filters I see in the PMEQ are Low Shelf Filter (LSF), High Pass Filter (HPF), and Band Pass Filter (BPF).
Thanks. That's disappointing there's only 3 filters, not least because peak/dip is basically the foundation of a PEQ. Plus, the Ibasso DX160 seems to have 8 filters and is a 1/3 of the price. Anyway, I'll see how it functions next week. It would be good if they could provide a new firmware with all the basic filters installed.The only filters I see in the PMEQ are Low Shelf Filter (LSF), High Pass Filter (HPF), and Band Pass Filter (BPF).
I'm also looking for a PEQ dap is the dx160 the only viable option?Thanks. That's disappointing there's only 3 filters, not least because peak/dip is basically the foundation of a PEQ. Plus, the Ibasso DX160 seems to have 8 filters and is a 1/3 of the price. Anyway, I'll see how it functions next week. It would be good if they could provide a new firmware with all the basic filters installed.
From what I gather, the DX160, the DX220, and the Looto are the only options. The DX220 is out for me because of battery life. I'm getting the LP6K next week and I'll see how the PEQ is. There are other very good EQ systems on other daps, especially Cowon, but they're not PEQ. I wish there was a dap with a PEQ as good as the one on Roon. Any other suggestions welcome.I'm also looking for a PEQ dap is the dx160 the only viable option?
Have noticed that some tracks on shuffle mode are playing much more frequently than other ones. Did someone notice same thing?
Got the Paw 6000 (after being hit with a massive customs charge). Some initial observations:
1. A "genre" selection is very much needed on the main page. I thought I could get around this with the folder option, but that's cumbersome.
2. The PEQ is indeed very good, but limited by the three filters. I would at least like to see a peak filter in next firmware.
3. Accessing and tweaking PEQ is fiddly. I knew that in advance, but the extent to which it's actually counter-intuitive is remarkable. Needs to be streamlined.
4. One annoyance in the EQ - you can't see below 75hz on the edit screen even though you can edit down to 10hz or lower.
5. When selecting an album, you're shown the name of the file instead of the song. Annoying and unnecessary.
6. To make it worse, you can't even seem to play an album in order! For example, if the filer names are numbered as "The Ritual [1]," "The Ritual [2]," "The Ritual [10]," then it'll play tracks 1, 10, and then 2. That's madness. Is there a workaround for this?
I'll be back with sound impressions vis-a-vis the WM1A. If anyone can help with point 6 in particular, I'd be grateful.
1. A "genre" selection is very much needed on the main page. I thought I could get around this with the folder option, but that's cumbersome.
2. The PEQ is indeed very good, but limited by the three filters. I would at least like to see a peak filter in next firmware.
3. Accessing and tweaking PEQ is fiddly. I knew that in advance, but the extent to which it's actually counter-intuitive is remarkable. Needs to be streamlined.
4. One annoyance in the EQ - you can't see below 75hz on the edit screen even though you can edit down to 10hz or lower.
5. When selecting an album, you're shown the name of the file instead of the song. Annoying and unnecessary.
6. To make it worse, you can't even seem to play an album in order! For example, if the filer names are numbered as "The Ritual [1]," "The Ritual [2]," "The Ritual [10]," then it'll play tracks 1, 10, and then 2. That's madness. Is there a workaround for this?
I'll be back with sound impressions vis-a-vis the WM1A. If anyone can help with point 6 in particular, I'd be grateful.
Got the Paw 6000 (after being hit with a massive customs charge). Some initial observations:
1. A "genre" selection is very much needed on the main page. I thought I could get around this with the folder option, but that's cumbersome.
2. The PEQ is indeed very good, but limited by the three filters. I would at least like to see a peak filter in next firmware.
3. Accessing and tweaking PEQ is fiddly. I knew that in advance, but the extent to which it's actually counter-intuitive is remarkable. Needs to be streamlined.
4. One annoyance in the EQ - you can't see below 75hz on the edit screen even though you can edit down to 10hz or lower.
5. When selecting an album, you're shown the name of the file instead of the song. Annoying and unnecessary.
6. To make it worse, you can't even seem to play an album in order! For example, if the filer names are numbered as "The Ritual [1]," "The Ritual [2]," "The Ritual [10]," then it'll play tracks 1, 10, and then 2. That's madness. Is there a workaround for this?
I'll be back with sound impressions vis-a-vis the WM1A. If anyone can help with point 6 in particular, I'd be grateful.
For 6, maybe pad the numbers with a 0? e.g. “The Ritual [01]”, “The Ritual [02]”. The sorting seems to be alphanumeric.
DAPpower
1000+ Head-Fier
Got the Paw 6000 (after being hit with a massive customs charge). Some initial observations:
1. A "genre" selection is very much needed on the main page. I thought I could get around this with the folder option, but that's cumbersome.
2. The PEQ is indeed very good, but limited by the three filters. I would at least like to see a peak filter in next firmware.
3. Accessing and tweaking PEQ is fiddly. I knew that in advance, but the extent to which it's actually counter-intuitive is remarkable. Needs to be streamlined.
4. One annoyance in the EQ - you can't see below 75hz on the edit screen even though you can edit down to 10hz or lower.
5. When selecting an album, you're shown the name of the file instead of the song. Annoying and unnecessary.
6. To make it worse, you can't even seem to play an album in order! For example, if the filer names are numbered as "The Ritual [1]," "The Ritual [2]," "The Ritual [10]," then it'll play tracks 1, 10, and then 2. That's madness. Is there a workaround for this?
I'll be back with sound impressions vis-a-vis the WM1A. If anyone can help with point 6 in particular, I'd be grateful.
Unfortunately the Lotoo sorts files specifically by their file names instead of how they're tagged. You must rename your music files and number them in order by placing a "." after the number otherwise playback with those files will be corrupted and out of order.
Could do, but I literally have thousands of albums with this kind of ordering, so it would be tiresome. I'm at a loss as to why the Paw6000 doesn't just read tagged titles instead of file names. It's nuts.For 6, maybe pad the numbers with a 0? e.g. “The Ritual [01]”, “The Ritual [02]”. The sorting seems to be alphanumeric.
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)