JDS Labs ATOM Amp
Apr 27, 2019 at 3:59 PM Post #226 of 641
Ok i am having a bit of trouble comprehending what appears to be a $99 JDS labs amp outperforming the power of a $289 amp, the Little Dot MKIII.

Specs of LD MKIII Technical Specifications:
  • SEPP (Single-Ended Push Pull) OTL in Class-A
  • Frequency response: 12 hz~100 Khz (-1dB)
  • THD+N: 0.15% (80 mW @300 ohm)
  • Power Output:
  • 350 mW @ 300/600 ohm
  • 300 mW @ 120 oh
  • 100 mW @ 32 ohm
  • Variable Gain: 3,4,5, or 10x
  • Recommended Load Impedance: 32 ohm~600 ohm
  • Input Impedance: 50K ohms
  • Pre-Amplifier Output Impedance: 600 ohms
  • Pre-Amplifier Gain: 3-10x (also controlled via gain switches)
  • Pre-Amplifier Voltage: 10V RMS
JDS Labs Atom Amplifier Performance
  • Frequency Response, 20Hz-20kHz +/- 0.01dB
  • THD+N, 1kHz, 32 Ω 0.0008%
  • THD+N, 20Hz-20kHz, 32 Ω 0.0012%
  • IMD CCIF 19/20kHz 32 Ω 0.0002%
  • IMD SMPTE 32Ω 0.0005%
  • Noise, A-Weighted -114 dBu
  • Crosstalk @ 150 Ω -87 dB
  • Output Impedance 0.1 Ω
  • Channel Balance < 0.6 dB
  • Max Output @ 600Ω 125mW (8.68 VRMS)
  • Max Output @ 150Ω 502 mW (8.66 VRMS)
  • Max Output @ 32Ω 1 Watt (5.66 VRMS)

    It appears that the stock Atom outperforms the stock LD MKIII in terms of power output. Is this correct or some please explain how i am wrong??




 
Apr 27, 2019 at 9:19 PM Post #227 of 641
Ok i am having a bit of trouble comprehending what appears to be a $99 JDS labs amp outperforming the power of a $289 amp, the Little Dot MKIII.

Specs of LD MKIII Technical Specifications:
  • SEPP (Single-Ended Push Pull) OTL in Class-A
  • Frequency response: 12 hz~100 Khz (-1dB)
  • THD+N: 0.15% (80 mW @300 ohm)
  • Power Output:
  • 350 mW @ 300/600 ohm
  • 300 mW @ 120 oh
  • 100 mW @ 32 ohm
  • Variable Gain: 3,4,5, or 10x
  • Recommended Load Impedance: 32 ohm~600 ohm
  • Input Impedance: 50K ohms
  • Pre-Amplifier Output Impedance: 600 ohms
  • Pre-Amplifier Gain: 3-10x (also controlled via gain switches)
  • Pre-Amplifier Voltage: 10V RMS
JDS Labs Atom Amplifier Performance
  • Frequency Response, 20Hz-20kHz +/- 0.01dB
  • THD+N, 1kHz, 32 Ω 0.0008%
  • THD+N, 20Hz-20kHz, 32 Ω 0.0012%
  • IMD CCIF 19/20kHz 32 Ω 0.0002%
  • IMD SMPTE 32Ω 0.0005%
  • Noise, A-Weighted -114 dBu
  • Crosstalk @ 150 Ω -87 dB
  • Output Impedance 0.1 Ω
  • Channel Balance < 0.6 dB
  • Max Output @ 600Ω 125mW (8.68 VRMS)
  • Max Output @ 150Ω 502 mW (8.66 VRMS)
  • Max Output @ 32Ω 1 Watt (5.66 VRMS)

    It appears that the stock Atom outperforms the stock LD MKIII in terms of power output. Is this correct or some please explain how i am wrong??




yes the atom has more power and lower distortion, you buy the little dot because it is a tube amp if you are into that.
 
May 11, 2019 at 8:53 AM Post #229 of 641
I got a SPace plus dac, would this pair nicely with jds labs atom? using for desktop headphones. tired of the weak performance of my ibasso mk2.
Yep it would be, and your other options are the cavalli liquid spark, schiit magni (if you need way more power only).
 
May 17, 2019 at 12:08 PM Post #230 of 641
I am torn between three amps right now. Headamp Gilmore Lite MK2, Rupert Neve Designs RNHP and the JDS Labs Atom. Price aside, have you compared the sound of these amps? If you did, please share. Thank you.
 
May 27, 2019 at 8:48 AM Post #231 of 641
I have heard the Gilmore Lite MK2 and Rupert Neve Designs RNHP and were both good but nothing special so I ended up buying the Atom and its been awesome and with 400 quid left over was a no brainer IMO :).
 
Last edited:
Jun 5, 2019 at 2:27 AM Post #237 of 641
Hey guys so does the ATOM need an DAC?

The EL Dac is also $100, (do I need optical version?)

is it worth getting both? trying to run 300hm cans (hd800S)
 
Last edited:
Jun 5, 2019 at 2:42 AM Post #239 of 641
You might not need a DAC, it depends what are you using as a source and how clean the output is. Getting a DAC is a good idea, but it might not be necessary, if you have enough budget go for it.

why not need a dac?

Main sources will be Flac Files with hd800s

also whats the use for optical input?
 

Users who are viewing this thread

Back
Top