Infoseeker
Headphoneus Supremus
Would the amp12 module EX or NP mods be able to increase things like the Crosstalk rating spec?
On the AMP12 it's a real dedicated line out (on the left). You don't have option in software to switch PO to LO.only took me two months with dx300 to pull trigger on amp12. One of the things in description is 4.4mm balanced line out. doesn't amp 11 mk2 already have that?
And a good one!On the AMP12 it's a real dedicated line out (on the left). You don't have option in software to switch PO to LO.
I heard that you can attach BAL load to SE source but not visa versaYou need a cable or adapter balanced to se
Like this one https://www.audiophonics.fr/fr/adaptateurs-jack/dd-dj44c-mkii-adaptateur-jack-44mm-symetrique-femelle-vers-jack-35mm-asymetrique-male-plaque-or-p-15260.html?search_query=adaptateur 4.4&fast_search=fs
That adapter is not valid, the connectors would be the opposite.You need a cable or adapter balanced to se
Like this one https://www.audiophonics.fr/fr/adaptateurs-jack/dd-dj44c-mkii-adaptateur-jack-44mm-symetrique-femelle-vers-jack-35mm-asymetrique-male-plaque-or-p-15260.html?search_query=adaptateur 4.4&fast_search=fs
This https://www.ddhifi.com/productinfo/963215.htmlThat adapter is not valid, the connectors would be the opposite.
In fact, it is not possible to go from a balanced source to an unbalanced cable
.
I do the same with an iBasso cable included as stock with DX300 Max. You can probably email Paul and get one send to you (for ca. $15). You'd then need a female 3.5 to 3.5 SE cable for RCA connection. Bal to SE is not possible (without transformation), only the other way round.Is there any option to use AMP12 LO to feed non-balanced amp (e.g. stationary or car audio ones)? Or it is safer to do double-amping with AMP11?
You are correct. However the Amp12 has the hardware built in for SE out from 4.4mm. It is only that it needs the special Ibasso dongle (this one comes with both Maxes), or I think you can buy from Ibasso. It is very short, and you will need an adapter to extend it longerI heard that you can attach BAL load to SE source but not visa versa
Well, I would not trust much to use it
Agreed, and coming from me, the dongle from Ibasso is designed to specifically benefit from the Balanced out into single ended out. Do not use anything else than Ibasso official dongle, you can add extensionsWell, I would not trust much to use it