Rob Watts
Member of the Trade: Chord Electronics
- Joined
- Apr 1, 2014
- Posts
- 3,144
- Likes
- 12,424
Hmm - I will have XLR to 4mm adaptors with me, I am not sure that will help you though...
Hi Rob, can I ask why the hugo TT 2 doesn't have a three pin socket like the Dave, with the hugo TT 2 having a more powerful amp it baffles me how the power supply isn't more powerfulHmm - I will have XLR to 4mm adaptors with me, I am not sure that will help you though...
Hmm - I will have XLR to 4mm adaptors with me, I am not sure that will help you though...
Yes that's correct. That said, some power amps and cables will prefer the xlr balanced connection too; but sure the SE is the simplest and hence potentially the most transparent. With headphones you won't need the extra power or voltage that balanced supply...Nope. But that’s ok. I plan to bring my stock single-ended 6.3mm cable, and I also have a female XLR to 6.3mm male adapter.
If I understood you correctly, you actually say your SE outputs are the most transparent, and preferred over the balanced outs for the ultimate SQ, correct?
And that the only reason to use balanced was for inefficient loads, when high power was needed?
From what I've read the expected price of the Hugo TT2 (release now expected in October) in the US is ~$6,000, but of course may change depending on exchange rates.So Chord is keeping Chord TT2 priced around $3500 right? I hope Chord does as I think this price point is perfect for Chord TT2. I firmly believe it is the price point for the average audiophille who would spend no more than 2K to crossover to the higher end audiophille market. I see many many Hugo owners crossing over and purchasing the TT2 at this price point of $3,500!
This is perhaps a question for Rob.
When you turn on or off the TT2 with the remote, does it produce a "pop" through your headphones/speakers? The reason I ask is, the other day I was demoing some power amps and speakers at a dealer, and brought along my Mojo as source. When the demo was finished, I turned off the Mojo and it produced a loud "pop" through the dealer's speakers and he was not too pleased. I guess it was some kind of relay or solenoid in the Mojo's on/off switch that did this - normally I use my Mojo for headphone duties so this POP doesn't bother me, but if I were to buy the TT2 in the future, I'd like to know if this POP does exist because I'll be using the TT2 either connected to power amps + speakers or to passive speakers directly via the XLR outputs. And finally, does this POP actually hurt/damage your speakers or it is just annoying?
P.S. if this POP does exist in the TT2 and is unavoidable, am I better off just buying the Hugo2 instead and leave it on all the time?
I’m interested in Rob’s response as well, but you should know that it’s the same for the DAVE. The DAVE manual instructs to always turn on the DAC first and off last for this reason, and I think it would be the best practice for all setups to avoid sudden current rushes causing loud pops through the amp/speakers.
This is perhaps a question for Rob.
When you turn on or off the TT2 with the remote, does it produce a "pop" through your headphones/speakers? The reason I ask is, the other day I was demoing some power amps and speakers at a dealer, and brought along my Mojo as source. When the demo was finished, I turned off the Mojo and it produced a loud "pop" through the dealer's speakers and he was not too pleased. I guess it was some kind of relay or solenoid in the Mojo's on/off switch that did this - normally I use my Mojo for headphone duties so this POP doesn't bother me, but if I were to buy the TT2 in the future, I'd like to know if this POP does exist because I'll be using the TT2 either connected to power amps + speakers or to passive speakers directly via the XLR outputs. And finally, does this POP actually hurt/damage your speakers or it is just annoying?
P.S. if this POP does exist in the TT2 and is unavoidable, am I better off just buying the Hugo2 instead and leave it on all the time?