Quote:
Originally Posted by haloxt /img/forum/go_quote.gif
Surely you must be able to see, I was just being sarcastic. What's also funny are the church steeples housing cell relays.
|
Sorry I didnt catch it, I just reread your previous posts on on this thread, now I see you were just being sarcastic
, yeah Ive read many churches are agreeing to let the cell companies put these up
Quote:
Default
I just got the setzter meter and all my outlets are way over what they say they should be.
I think I am going to send this thing back because I don't see how I'm going to fix the issue without putting a setzerizer in every outlet, which would be expensive and a apin since I only have double outlets.
I got high readings even when I plugged it into my BackUPS and Surge Suppressor strip.
So, I ordered that inexpensive meter on ebay and I need to figure out what to do next to try and clean up the electricity.
Replace mu BackUPS with a Isobar or Stezter Power Strip? Replace the Surge Suppressor my TV is on with the Brickwall Strip I still have also?
What to do about the outlet my refrigerator is plugged into which is probably gumming up the works throughout my apt?
Aaargh
I did use my Cellsensor Meter again and found that I had to move my BackUPS further away from me that I had it before. I also tested a wireless USB Mouse and it gave off very little EMF which surprised me. |
From what Ive read the dirty electricity is generated from two places at the mains and from your electronics
so... first you need to reduce the dirty electricity from the mains.To do that you would want to put two stetzerizers to the closest outlet that is connected to your circuit breaker (with the meter it will be much easier to find which outlet this is) putting filters in this outlet will cause the biggest drop in readings from the meters on all the other outlets. Then connect all your electronics into isobars to stop dirty electricity from your electronics from getting into your wires.
The cell censor is just a gaussmeter which will just detect the 60hz AC magnetic radiation. It depends how sensitive that meter is, it may not be very sensitive so after a short distance it cant pick up the magnetic radiation anymore but it might still be there.
The main radiation the wireless mouse will emit is RF is from of its wireless connection to the computer via bluetooth or whatever, and also RF noise (aka EMI,RFI,RF noise) from the circuits. To detect the first type of RF you need an RF meter that can measure digital RF up in the GHz range. to hear the RF noise you just need a simple AM transistor battery radio you probably already have, it will let you hear some of the RF noise the circuits emit.
Quote:
Thanks for the info. The flamers can flame all they want, I know I'm sensitive to EMF so I'm willing to try.
I will look into the Quantum products, are there specific products that you use so I know where to look? I know you mentioned something that plugs in and affects the wiring in the whole house-this sounds like something I'd be interested in, just don't want to confuse one product for another if they have multiple products.
I'll check out the Tachyon again also.
If I use the Quantum Product does that mean I wouldn't need the Tripplite Isobar Surge Suppressors? I would think it's still good to use those.
oops, just re-read your Post:
>nd they also make power strips that condition more specifically based on what is plugged into them<
Perhaps these would be better than the Isobars and can replace them? |
I know one guy that swears by the quantum products he was very emf sensitive and he says that using these products have brought him tremendous relief. Ive tried their software and I definitlly felt something sometimes it felt like it provided some relief from the the symptoms that using a computer caused me. From my experience these types of products dont come close to the relief of actually reducing the fields though, which these products dont do.
The isobars and the the stetzer and quantum power strip are basically the same, these devices all filter the dirty electricity to reduce noise from the outlets to provide cleaner power to devices. Strips that do this say EMI/RFI filtering or reducing, though some cheap ones that say this dont atcually do anything sometimes. Quantum actually states in its site that their strip is basically a regular EMI/RFI filter.
I would get the isobar power strips the ones that come in a white metal case, Ive never measured those little two outlet ones that plug directly to a wall my guess is that they are not the same.
Quote:
Yes, even though it is mentioned that MU shielding is in their HFI versions, I contacted them and they said it is not although supposedly these models still have reduced EMF. The one I'm interested in is $89 so I think I'll try that one first.
I'll report back as soon as I test it. |
I think only their hfi680 hfi780 and their pro and proline models have the full mu-metal bufferboard shielding, the lower end models dont or only have partial shielding. I know for sure the the pro/proline 750 and pro/proline 2500 have it because Ive removed the ear pads and you can see the mu-metal bufferboard, Ive also measured them with my meters as well and they have considerably less radiation tn my grado and sennheiser headphones I had.
Quote:
You should probably go to a doctor with your EMF sensitivity. If you can actually legitimately feel EMF that could help medicine figure somethings out.
Have you talked to your doctor about this at all? |
Theres not many Dr. that are aware of the effects of EMFs yet, they might just dismiss you as being depressed or having anxiety their scapegoat diagnosis when they dont know whats wrong with you, and even the ones that are aware wont be able to offer any real solutions.
Some Dr's that are usually more knowledgeable about this are integrative Dr`s these are basically actual Dr`s with degrees but but they also integrate alternative medicine, and they are more knowledgeable about
Dr`s in Europe particularly German Dr`s are normally more aware of this, in Germany and other European countries they are much more aware of how harmful EMfs are , much of the most recent research has/is been done in Europe Germany particularly.
Theres an organization called bau-biologie which is from Germany and they also have branches here in the US. You can arange for a consult with one and they will come to your house and take measurments and offer you solutions to reduce EMfs in your home. Youd be surprised how many home have wiring errors or other problems that cause high EMFs in the home.
Ive been personally researching solutions to help wit EMFs from computers and Ive been talking about my findings on an EMF sensitivity forum and EMF forum (esens and EMFrefugee) and some bau biologists are now strarting to recommend some of these solutions.